MAX1483EPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1483 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 35μA |
| Data Rate | 250kbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 75mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 2250 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 2000 ns |
| Output Low Current-Max | 0.004A |
| Out Swing-Min | 5 V |
| Height | 4.45mm |
| Length | 9.91mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1483EPA+ Overview
Due to the enhanced 8-DIP (0.300, 7.62mm) package, this driver IC is excellent for driving common LEDs.The Tube package houses this receiver.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.Ideally, you should place this wide receiver on a Through Hole-type PCB or development board.This differential driver requires a 4.75V~5.25V power supply.At any one time, this electronic part can have up to 1/1 eligible receivers/drivers.This ic receiver has been primarily designed for applications where the operating temperature is -40°C~85°C.5V is the supply voltage range that this line driver ic can efficiently operate with.In this wide receiver, 8 terminations are integrated for driving and receiving signals from data.ICs that are packaged with market standard pinouts are available on the market.This part number MAX1483 can be used to search for more variants based on the product type, temperature, package, etc.8-pin driver IC with improved power dissipation control.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Through Hole mounting techniques.There is a capability of 1-bit resolution with this ic receiver.There are typically 1 bits of resolution specified in the specifications of this receiver.An input voltage supply of 5V is required to operate the transceiver module.There is a subcategory called Line Driver or Receivers for this rf transceiver module.IC5V is a high performance driver IC designed to work with a 5V power supply.There are 1 transceivers in total implemented by this IC.
MAX1483EPA+ Features
Tube package
8 pin count
8 pins
5V power supply
MAX1483EPA+ Applications
There are a lot of Maxim Integrated MAX1483EPA+ Drivers/Receivers/Transceivers applications.
- TV signal transmission
- Routers
- Automation systems
- Cordless telephone
- Wireless security systems
- Wireless 3D game
- IP cameras
- Wireless projection application for business talks
- Satellite ground stations
- Cable network front end
