MAX14871EUE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Applications | General Purpose |
| Technology | Bi-CMOS |
| Voltage - Supply | 4.5V~36V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX14871 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Operating Supply Voltage | 36V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | PWM |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Output Configuration | Half Bridge (2) |
| Current - Output | 3A |
| Voltage - Load | 4.5V~36V |
| Motor Type - AC, DC | Brushed DC |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX14871EUE+ Overview
The package is designed with [0].This part is packed in a 16-TSSOP (0.173, 4.40mm Width) Exposed Pad case.In most cases, it is recommended to mount the part at Surface Mount.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.There is a possibility of providing 4.5V~36Vvolts through the device.In terms of operating temperature, it falls within the range -40°C~150°C TJ.In this case, the motor type is Brushed DC.The part has 16terminations available.Voltage can be applied at a rate of 4.5V~36V volts to the load.I would like to remind you that this amplifier should be operated at 12V.Surface Mountis the recommended mounting method.Keep the part output current at 3A.This device utilizes the BRUSH DC MOTOR CONTROLLERanalog integrated circuit.As a result of the MAX14871part number, it can be found.This device is designed with a pin count of 16.Drivers controllers is possible to access 2outputs.The supply voltage for this driver is 36V.
MAX14871EUE+ Features
Applications : General Purpose
Load voltage across the chip 4.5V~36V
base on MAX14871 number
designed with 2 outputs
MAX14871EUE+ Applications
There are a lot of Maxim Integrated MAX14871EUE+ motor drivers applications.
- Lighting for health and wellbeing
- Infotainment backlighting
- Hazardous application
- A cross between entertainment
- Outdoor area lights
- High brightness LED lighting
- CHMSL (center high-mount stop lamps)
- PWM generators
- Step-up or step-down driver topologies
- Dome
