MAX1487CUA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 830mW |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1487 |
| Pin Count | 8 |
| Output Voltage | 12.5V |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Nominal Supply Current | 500μA |
| Data Rate | 2.5Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 70mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 200 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 60 ns |
| Output Low Current-Max | 0.004A |
| High Level Input Current-Max | 0.000002A |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1487CUA+ Overview
Designed for common LEDs, this driver IC features an enhanced 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.In this package, the receiver is mounted in the Tube format.The Transceiver can transceiver type enables this part to be used in a wide range of applications.This wide receiver can be placed on any Surface Mount-type PCB or development board.This differential driver requires a 4.75V~5.25V power supply.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.IC receiver likes this one are designed for use in applications where operating temperatures are 0°C~70°C.This line driver ic can operate efficiently with a supply voltage range of 5V.In this wide receiver, 8 terminations are integrated for driving and receiving signals from data.This transceiver is packaged with 8 market standard pinoutsAs the base part number MAX1487 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.This is a 8-pin driver IC with enhanced power dissipation control.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Surface Mount mounting technologies.There is a capability of 1-bit resolution with this ic receiver.There are typically 1 bits of resolution specified in the specifications of this receiver.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.In total, there are 1 transceivers implemented by this module isolated transceiver.There is a capabilWide receivery to deliver voltage at 12.5V wWide receiverh this device.
MAX1487CUA+ Features
Tube package
8 pin count
8 pins
5V power supply
MAX1487CUA+ Applications
There are a lot of Maxim Integrated MAX1487CUA+ Drivers/Receivers/Transceivers applications.
- Wireless showroom
- Wireless smart house
- Fiber-to-the-desktop
- Cordless telephone
- Pocket PC
- Wireless 3D game
- Transmission stations
- Automation systems
- Precision engineering measurement
- Notebook
