MAX1487CUA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1487 |
| Pin Count | 8 |
| Output Voltage | 12.5V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 300μA |
| Data Rate | 2.5Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 70mV |
| Receive Delay-Max | 200 ns |
| Transmit Delay-Max | 60 ns |
| Output Low Current-Max | 0.004A |
| High Level Input Current-Max | 0.000002A |
| Number of Transmitters | 1 |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1487CUA+T Overview
Driver ICs with enhanced 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) packages are excellent for driving LEDs with common characteristics.Tape & Reel (TR) package is used to mount this receiver.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.On any Surface Mount-type PCB or development board, this wide receiver can be placed.A differential driver like this uses 4.75V~5.25V of power.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.For applications where the operating temperature is 0°C~70°C, this ic receiver was designed primarily.Driver ICs with a supply voltage range of 5V can operate efficiently.It is packaged with 8 pinouts that are market standard for this particular transceiver.MAX1487 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.An enhanced power dissipation control is provided by this 8-pin driver IC.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Surface Mount mounting techniques.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.As a rule of thumb, this receiver is typically specified with a resolution of 1 bits.There is a voltage input supply of 5V required for the operation of this integrated circuit.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.It is designed so that it can be operated from a 5V power supply with this driver IC.A transmitter, or can transceiver that produces radio waves with the aid of an antenna, is used in telecommunications to transmit or send data.A voltage of 12.5V can be delivered by Wide receiver.
MAX1487CUA+T Features
Tape & Reel (TR) package
8 pin count
8 pins
5V power supply
MAX1487CUA+T Applications
There are a lot of Maxim Integrated MAX1487CUA+T Drivers/Receivers/Transceivers applications.
- Desktop PC
- Wireless modems
- Vehicle
- interconnection between computers
- Wireless multimedia center in smart home
- Cell phones
- Fiber optic cable connection network
- Satellite communication
- Wireless transmission
- Radio transmission
