MAX1487EESA+

8 Terminations5V 8 Pin MAX1487 Receivers1 Bits 1/1 Drivers/Receivers1 Functions

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX1487EESA+
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 386
Description: 8 Terminations5V 8 Pin MAX1487 Receivers1 Bits 1/1 Drivers/Receivers1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	506.605978mg
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	1996
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Transceiver
Subcategory	Line Driver or Receivers
Max Power Dissipation	471mW
Technology	CMOS
Voltage - Supply	4.75V~5.25V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX1487
Pin Count	8
Operating Supply Voltage	5V
Power Supplies	5V
Interface	RS-422, RS-485
Operating Supply Current	500μA
Supply Current-Max	0.5mA
Data Rate	2.5Mbps
Differential Output	YES
Output Polarity	COMPLEMENTARY
Protocol	RS422, RS485
Input Characteristics	DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers	1/1
Driver Number of Bits	1
Receiver Number of Bits	1
Duplex	Half
Receiver Hysteresis	70mV
Number of Transceivers	1
ESD Protection	Yes
Receive Delay-Max	200 ns
Simplex/Duplex	Half Duplex
Transmit Delay-Max	60 ns
Output Low Current-Max	0.004A
High Level Input Current-Max	0.000002A
Height	1.5mm
Length	5mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX1487EESA+ Overview

An excellent driver IC for common LEDs thanks to its enhanced 8-SOIC (0.154, 3.90mm Width) package.The receiver is packaged in a Tube package.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.You can place this wide receiver to any Surface Mount-type PCB or development board.It takes 4.75V~5.25V from the power supply to run this differential driver.There can be up to 1/1 eligible receivers/drivers on the field at the same time with this electronic part.As its name implies, this ic receiver is designed for applications where -40°C~85°C is the operating temperature.With a supply voltage range of 5V, this line driver ic operates efficiently.There are 8 terminations in this wide receiver so that signals can be driven from the data and received.ICs that are packaged with market standard pinouts are available on the market.You can search with MAX1487 to get more variants of this part, since it identifies the product type, temperature, package, etc.The driver IC has improved power dissipation control.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Surface Mount mounting techniques.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.It is typical for this receiver to have a resolution of 1 bits when it is specified.There is a 5V input voltage supply that can be used to operate this transceiver module.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.The optical transceiver module's VCC pin should receive enough input current, but not more than 0.5mA.There is no matter what the input voltage is. The integrating circuit is able to drive LEDs with an input voltage of 500μA.