banner_page

MAX1488EEPD+

14 Terminations14 Pin MAX1488 Receivers1 Bits 4/0 Drivers/Receivers4 Functions


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX1488EEPD+
  • Package: 14-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 638
  • Description: 14 Terminations14 Pin MAX1488 Receivers1 Bits 4/0 Drivers/Receivers4 Functions(Kg)

Details

Tags

Parameters
Interface Standard EIA-232; V.28; EIA-562
Transmit Delay-Max 5400 ns
Supply Voltage1-Nom -12V
Out Swing-Min 7.4 V
High Level Input Current-Max 0.000002A
Height Seated (Max) 4.572mm
Length 19.05mm
Width 7.62mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mounting Type Through Hole
Package / Case 14-DIP (0.300, 7.62mm)
Surface Mount NO
Number of Pins 14
Operating Temperature -40°C~85°C
Packaging Tube
Published 1995
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Type Driver
Terminal Finish Matte Tin (Sn)
HTS Code 8542.39.00.01
Technology CMOS
Voltage - Supply 4.5V~13.2V
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 12V
Terminal Pitch 2.54mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number MAX1488
Pin Count 14
Qualification Status Not Qualified
Power Supplies +-4.5/+-13.2V
Supply Current-Max 0.18mA
Data Rate 120Kbps
Output Characteristics TOTEM-POLE
Differential Output NO
Output Polarity INVERTED
Protocol RS232
Input Characteristics GATED
Number of Drivers/Receivers 4/0
Driver Number of Bits 1

MAX1488EEPD+ Overview


Due to the enhanced 14-DIP (0.300, 7.62mm) package, this driver IC is excellent for driving common LEDs.The Tube package houses this receiver.The Driver can transceiver technology has enabled this part to power many solutions for a variety of uses.Any Through Hole-type PCB or development board can be used with this wide receiver.With respect to the power supply, this differential driver uses 4.5V~13.2V.Up to 4/0 receivers/drivers can be installed simultaneously on this electronic part.This ic receiver has been primarily designed for applications where the operating temperature is -40°C~85°C.Wide receiver can operate within the range of 12V supply voltages efficiently.Wide receiver has 14 terminations built in for driving or receiving signals from data.The transceiver is packaged with 14 market standard pinouts so that it can be easily used.You can search with MAX1488 to get more variants of this part, since it identifies the product type, temperature, package, etc.14-pin driver chip with enhanced power dissipation.There is a capability of 1-bit resolution with this ic receiver.There is one driver IC in this package which is intended to be operated by +-4.5/+-13.2V of power.It is recommended that enough current be supplied to the VCC pin of the ic receiver, but not more than 0.18mA.

MAX1488EEPD+ Features


Tube package
14 pin count
14 pins
+-4.5/+-13.2V power supply

MAX1488EEPD+ Applications


There are a lot of Maxim Integrated MAX1488EEPD+ Drivers/Receivers/Transceivers applications.

  • Desktop radio
  • Portable radio
  • Wireless multimedia center in smart home
  • LAN, SAN, WAN (local, storage, work area networks)
  • Datacom networking applications
  • TV signal transmission
  • Wireless access points
  • Cell phones
  • Wireless network systems
  • Satellite communications networks

Write a review

Note: HTML is not translated!
    Bad           Good