MAX1489ECPD+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Current Rating | 60A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1489 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Supply Current-Max | 0.6mA |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 0/4 |
| Receiver Number of Bits | 4 |
| Receiver Hysteresis | 1.11V |
| Interface Standard | EIA-232; TIA-232; V.28; EIA-562; TIA-562 |
| Receive Delay-Max | 4000 ns |
| Output Low Current-Max | 0.0032A |
| Height Seated (Max) | 4.572mm |
| Length | 19.05mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1489ECPD+ Overview
LED drivers benefit from this IC's enhanced 14-DIP (0.300, 7.62mm) package.The package of this receiver is Tube.Being a Receiver can transceiver, this part has empowered many solutions to serve for a variety of applications.Ideally, you should place this wide receiver on a Through Hole-type PCB or development board.In terms of power supply, this differential driver utilizes 4.5V~5.5V.There can be up to 0/4 eligible receivers/drivers on the field at the same time with this electronic part.As its name implies, this ic receiver is designed for applications where 0°C~70°C is the operating temperature.Driver ICs with a supply voltage range of 5V can operate efficiently.Wide receiver has 14 terminations built in for driving or receiving signals from data.Transceiver comes with 14 standard pinouts that meet the market's requirements.The base part number MAX1489 identifies the product type, temperature, package, etc., so you can search for more variants by using it.14-pin driver chip with enhanced power dissipation.There is typically a resolution of 4 bits specified with this receiver.IC5V is a high performance driver IC designed to work with a 5V power supply.Ensure that the VCC pin of the ic receiver receives sufficient but not more than 0.6mA of input current.
MAX1489ECPD+ Features
Tube package
14 pin count
14 pins
5V power supply
MAX1489ECPD+ Applications
There are a lot of Maxim Integrated MAX1489ECPD+ Drivers/Receivers/Transceivers applications.
- Single to Multimode Fiber Conversion
- Portable radio
- Indoor ad hoc meeting
- Clock radio
- Sensor reporting
- Low power, low voltage systems
- Fiber distributed data interface (FDDI)
- TV signal transmission
- Changeing the frequency from IF to RF
- Point-to-point networking
