MAX1490EACPG+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.600, 15.24mm) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | TIN |
| Max Power Dissipation | 696mW |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX1490 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Interface | RS-422, RS-485 |
| Nominal Supply Current | 180mA |
| Data Rate | 2.5Mbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 70mV |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1490EACPG+ Overview
Driver ICs with enhanced 24-DIP (0.600, 15.24mm) packages are excellent for driving LEDs with common characteristics.There is a Tube package for this receiver.The Transceiver can transceiver type enables this part to be used in a wide range of applications.The wide receiver can be mounted on any Through Hole-type PCB or development board.This differential driver consumes 4.5V~5.5V for its power supplyUp to 1/1 receivers/drivers can be installed simultaneously on this electronic part.In most applications, this ic receiver is used in environments where 0°C~70°C is the operating temperature.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.Integrated into this wide receiver are 24 terminations that are used for driving and receiving signals from data.Transceiver comes with 24 standard pinouts that meet the market's requirements.You can search with MAX1490 to get more variants of this part, since it identifies the product type, temperature, package, etc.The driver IC has improved power dissipation control.A combination of optical transceiver downsizing and high-density Through Hole mounting reduces the package size dramatically.It is important to note that this ic receiver had a maximum resolution of 1 bits.There are typically 1 bits of resolution specified in the specifications of this receiver.There are two types of input voltage supply available for this IC, 5V.There are 1 transceivers in total implemented by this IC.
MAX1490EACPG+ Features
Tube package
24 pin count
24 pins
MAX1490EACPG+ Applications
There are a lot of Maxim Integrated MAX1490EACPG+ Drivers/Receivers/Transceivers applications.
- Wireless projection application for business talks
- Notebook
- Switching system
- Ethernet circuitry
- Car radio
- Carrier phase observations
- Wireless network systems
- IP cameras
- Wireless projection application for conferences
- Cell phones
