MAX1490EAEPG+
| Parameters | |
|---|---|
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.600, 15.24mm) |
| Number of Pins | 24 |
| Weight | 3.740011g |
| Manufacturer Package Identifier | P24M-2 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | TIN |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 696mW |
| Technology | HYBRID |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1490 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Operating Supply Current | 180mA |
| Data Rate | 2.5Mbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 70mV |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Height | 5.08mm |
| Length | 32.26mm |
| Width | 14.61mm |
MAX1490EAEPG+ Overview
An excellent driver IC for common LEDs thanks to its enhanced 24-DIP (0.600, 15.24mm) package.In this package, the receiver is mounted in the Tube format.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.The wide receiver can be mounted on any Through Hole-type PCB or development board.This differential driver consumes 4.5V~5.5V for its power supplyDuring operation, this electronic part may have up to 1/1 eligible receivers/drivers.For applications where the operating temperature is 0°C~70°C, this ic receiver was designed primarily.An output voltage range of 5V is sufficient to run this line driver ic efficiently.Wide receiver has 24 terminations built in for driving or receiving signals from data.As a standard package, this transceiver comes with a 24-pin layout that follows the market standard.For more variants of this part, try searching with the base part number MAX1490, which indicates the product type, temperature, package, etc.24-pin driver chip with enhanced power dissipation.Through optical transceiver downsizing and high-density Through Hole mounting technologies, its package size is reduced dramatically.Using this ic receiver, you were able to achieve a resolution of 1 bits.In most cases, the receiver will be specified with a 1-bit resolution.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.IC5V is a high performance driver IC designed to work with a 5V power supply.Transceivers implemented by this IC total 1 in total.With this integrating circuit you can drive LEDs of a voltage of up to 180mA. It can be used to drive large displays.
MAX1490EAEPG+ Features
Tube package
24 pin count
24 pins
5V power supply
MAX1490EAEPG+ Applications
There are a lot of Maxim Integrated MAX1490EAEPG+ Drivers/Receivers/Transceivers applications.
- Wireless HD Photography
- Servers
- Fiber optic cable connection network
- Military satellite communications
- Telecom applications
- Wireless interactive experience
- Car radio
- Broadcast application
- Wireless teaching
- Interconnection between switches and computers
