MAX15000BEUB+
| Parameters | |
|---|---|
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 23.6V~30V |
| Control Features | Enable |
| Input Voltage (Min) | 9.05V |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 12.5kHz~625kHz |
| Input Voltage (Max) | 23.6V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Frequency | 2.5MHz |
| Max Duty Cycle | 75 % |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX15000 |
| Function | Step-Up, Step-Up/Step-Down |
MAX15000BEUB+ Overview
Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller suits most application needs. The dc motor controller is adquate to generate for 1 outputs. PMIC packaging is solid with a Tube enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 23.6V~30V. Work well in dc switchers with a -40°C~85°C TA. Using this switching controller, it is possible to switch at 12.5kHz~625kHz. dc dc regulators can be carried out with Surface Mount. The dcdc regulator features Enable for efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. switching converters terminal (s) are designed to be at DUAL. Various 10 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. In addition to "MAX15000", there are other relevant dc to dc converter ics you can find. There are only 10 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. dc dc voltage regulators should have a minimum input voltage of 9.05V. This dc to dc regulator accepts only 23.6V input voltage at most. You should note down the dc dc regulator's usual output current of 1A when you start a project. It is set to 75 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. DC regulator's maximum frequency is 2.5MHz.
MAX15000BEUB+ Features
Transistor Driver Outputs
Switching Frequency: 12.5kHz~625kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 75 %
MAX15000BEUB+ Applications
There are a lot of Maxim Integrated MAX15000BEUB+ DC to DC converter applications.
- Surge protection circuits
- Medical monitoring systems
- Gear/thread machining machines
- Computed tomography (CT)
- Serial communication converter
- Automatic plug-in machines
- Various precision measuring instruments
- Program control systems
- Thermal power
- Grinders
