MAX15000BEUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX15000 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 23.6V~30V |
| Control Features | Enable |
| Input Voltage (Min) | 9.05V |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 12.5kHz~625kHz |
| Input Voltage (Max) | 23.6V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Frequency | 2.5MHz |
| Max Duty Cycle | 75 % |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX15000BEUB+T Overview
As a result of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) compact design, the switching controller is compatible with most applications. 1 outputs can be generated with the dc motor controller. A solid enclosure of Tape & Reel (TR) surrounds pmic. The program can handle Transistor Driver dc switching's outputs (s). dc controls with 23.6V~30V voltage are supplied and operated. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. In this switching controller, the switch can be set to 12.5kHz~625kHz. dc dc regulator is made easier with Surface Mount. For efficient switching control, the dcdc regulator features Enable. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Terminal (s) of the switching converters are designed at the DUAL position. 10 terminations with various dc switching's functions. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. You can find other relevant dc to dc converter ics by searching "MAX15000". The switching converter has a total of 10 pins. In particular, switching converter is a type of Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 9.05V. It should be fully noted that the dc to dc regulator only accepts 23.6V input voltage at most. It's important to remember that the dc dc regulator's normaloutput current is 1A, so you should note it down when starting a new project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 75 % during power-up and power-down. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. There is a maximum frequency of 2.5MHz for this dc regulators.
MAX15000BEUB+T Features
Transistor Driver Outputs
Switching Frequency: 12.5kHz~625kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 75 %
MAX15000BEUB+T Applications
There are a lot of Maxim Integrated MAX15000BEUB+T DC to DC converter applications.
- Overvoltage protection circuits in TV sets
- Injection molding machinery
- Handheld GPS
- Correction machines
- Industrial robots
- Production lines
- USB circuits
- Network technology
- Packaging
- Alternators
