MAX15001AEUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX15001 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 9.5V~24V |
| Control Features | Enable |
| Input Voltage (Min) | 9.5V |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 25kHz~625kHz |
| Input Voltage (Max) | 24V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Frequency | 2.5MHz |
| Max Duty Cycle | 50 % |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX15001AEUB+T Overview
This switching controller fits most application requirements since it is packaged in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. For outputs of 1, this dc motor controller is suitable. PMIC is packaged in a solid enclosure of Tape & Reel (TR). It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sdc controls with 9.5V~24V voltage are supplied and operated. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. Using this switching controller, it is possible to switch at 25kHz~625kHz. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Enable. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Terminal (s) of the switching converters are designed at the DUAL position. An array of 10 terminations of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. MAX15001 can be searched for other relevant dc to dc converter ics. There are a total of 10 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 9.5V. The dc to dc regulator is limited to 24V input voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 1A. A duty cycle set at 50 % ensures voltage regulator dc to dc reliability during power-on and power-off. DC switcher's Surface Mount qualifies it for most applications and prototypes. This dc regulatorhas a max frequency of 2.5MHz.
MAX15001AEUB+T Features
Transistor Driver Outputs
Switching Frequency: 25kHz~625kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
MAX15001AEUB+T Applications
There are a lot of Maxim Integrated MAX15001AEUB+T DC to DC converter applications.
- Flexible manufacturing cells
- Sensitive electronic devices
- Radio equipment
- Digital display device
- Household control circuits
- Scientific testing
- Handheld GPS
- Special machining machine tools
- Automatic testing equipment
- Surge protection circuits
