MAX15001BEUB+T
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX15001 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 9.5V~24V |
| Control Features | Enable |
| Input Voltage (Min) | 9.5V |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 12.5kHz~625kHz |
| Input Voltage (Max) | 24V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Frequency | 2.5MHz |
| Max Duty Cycle | 75 % |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
MAX15001BEUB+T Overview
The switching controller fits in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package and is ideal for most applications. 1 outputs are supported by the dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. With this function, you can deal with Transistor Driver dc switching's outputs (s). dc controls with 9.5V~24V voltage are supplied and operated. Qualified to work in an dc switcher with -40°C~85°C TA. In this switching controller, the switch can be set to 12.5kHz~625kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. For efficient switching control, the dcdc regulator features Enable. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. There are a terminal (s) on the switching converters that are designed at DUAL. There are many different types of terminations for 10. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. MAX15001 can be used to locate other relevant dc to dc converter ics. There are 10 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. dc dc voltage regulators should have a minimum input voltage of 9.5V. Considering the dc to dc regulator can only accept 24V input voltage, it is important to take note of this. normally, the dc dc regulator's output current is 1A, which you should keep in mind when starting a project. The maximum duty cycle of this voltage regulator dc to dc is set to 75 % to ensure reliability during power-up and power-down. The Surface Mount makes DC switcher suitable for most applications and prototypes. 2.5MHz is the maximum frequency of this dc regulators.
MAX15001BEUB+T Features
Transistor Driver Outputs
Switching Frequency: 12.5kHz~625kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 75 %
MAX15001BEUB+T Applications
There are a lot of Maxim Integrated MAX15001BEUB+T DC to DC converter applications.
- CMM
- Printing equipment
- Flexible manufacturing cells
- Combined machine tools
- Plate bending machines
- Packaging
- Nuclear power plants
- Low output voltage switching power supply circuits
- Industrial controllers
- Servo drive system
