MAX15002ATL+

40 Terminals 5.5V~23V 40-Pin MAX15002 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 200kHz~2.2MHz Transistor Driver

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX15002ATL+
Package: 40-WFQFN Exposed Pad
Datasheet: PDF
Stock: 902
Description: 40 Terminals 5.5V~23V 40-Pin MAX15002 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 200kHz~2.2MHz Transistor Driver (Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	40-WFQFN Exposed Pad
Number of Pins	40
Operating Temperature	-40°C~125°C TJ
Packaging	Tube
Published	2006
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	40
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Additional Feature	ALSO OPERATES AT 5 V INPUT
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX15002
Function	Step-Down
Number of Outputs	2
Qualification Status	Not Qualified
Output Voltage	18V
Output Type	Transistor Driver
Operating Supply Voltage	23V
Input Voltage-Nom	12V
Analog IC - Other Type	SWITCHING CONTROLLER
Operating Supply Current	4.3mA
Nominal Supply Current	4.3mA
Output Configuration	Positive
Output Current	20A
Voltage - Supply (Vcc/Vdd)	5.5V~23V
Control Features	Current Limit, Enable, Frequency Control, Phase Control, Power Good, Reset, Sequencing, Tracking
Input Voltage (Min)	5.5V
Topology	Buck
Control Mode	VOLTAGE-MODE
Frequency - Switching	200kHz~2.2MHz
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Max Frequency	2.2MHz
Height Seated (Max)	0.8mm
Length	6mm
Width	6mm
RoHS Status	ROHS3 Compliant

MAX15002ATL+ Overview

The switching controller fits in the 40-WFQFN Exposed Pad package and is ideal for most applications. This dc motor controller can be used to generate outputs with 2 numbers. Tube solid enclosure protects the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. A 5.5V~23V voltage is supplied to the dc control and used for operating it. Worked in a -40°C~125°C TJ dc switcher before. In this switching controller, the switch can be set to 200kHz~2.2MHz. Surface Mount makes it suitable for general dc dc regulator. Current Limit, Enable, Frequency Control, Phase Control, Power Good, Reset, Sequencing, Tracking provides dcdc regulator efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at QUAD . 40 terminations with various dc switching's functions. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. MAX15002 can be searched for other relevant dc to dc converter ics. In total, switching converter has 40 pins. There is a particular type of Switching Regulator or Controllers in switching converter. It is recommended that the input voltage of the dc dc voltage regulator be 5.5V. The test statistics indicate that DC regulator outputs a voltage of 18V. If you start a project, note down the dc dc regulator's usual output current of 20A. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. It is estimated that this dc regulatorhas a maximum frequency of 2.2MHz. The value of DC to DC voltage regulator is set to ALSO OPERATES AT 5 V INPUT in order to better satisfy the requirement. Users should apply 23V to operate the voltage regulator dc to dc safely and reliably. A current of 4.3mA is supplied to it. This the controllers dc has a nominal current supply of 4.3mA.

MAX15002ATL+ Features

Transistor Driver Outputs
Switching Frequency: 200kHz~2.2MHz
Current Limit, Enable, Frequency Control, Phase Control, Power Good, Reset, Sequencing, Tracking
PULSE WIDTH MODULATION
ALSO OPERATES AT 5 V INPUT