MAX15004AAUE+T
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX15004 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 100V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~40V |
| Control Features | Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 15kHz~500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 50 % |
| Clock Sync | Yes |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | IT CAN ALSO OPERATE WITH VOLTAGE MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
MAX15004AAUE+T Overview
In the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. A solid enclosure of Tape & Reel (TR) surrounds pmic. A total of Transistor Driver dc switching's outputs can be handled by it. dc controls with 4.5V~40V voltage are supplied and operated. Suitable for working in an dc switcher that has a -40°C~125°C TJ. There is a switch at 15kHz~500kHz that can be used with this controller. The Surface Mount allows it to be used for dc dc regulator in general. DCDC regulator is controlled efficiently by Enable, Frequency Control, Soft Start. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. 16 terminations with a variety of function. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 14V volts. A search for "MAX15004" will reveal other relevant dc to dc converter ics. Particularly, switching converter is a type of Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 4.5V. According to the test statistics, DC regulator outputs 100V voltage. normally, the dc dc regulator's output current is 1A, which you should keep in mind when starting a project. Voltage regulator dc to dc is designed to operate at 50 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. DC regulator has a maximum frequency of 1MHz. The value of DC to DC voltage regulator is set at IT CAN ALSO OPERATE WITH VOLTAGE MODE in order to fulfill the requirements more effectively. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 40V.
MAX15004AAUE+T Features
Transistor Driver Outputs
Switching Frequency: 15kHz~500kHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
IT CAN ALSO OPERATE WITH VOLTAGE MODE
MAX15004AAUE+T Applications
There are a lot of Maxim Integrated MAX15004AAUE+T DC to DC converter applications.
- Electrical distribution systems
- Arc suppression circuits
- Network technology
- Sensitive electronic devices
- Current source circuits
- Product burn-in
- Cutting machine tools
- Computer-related products
- Production lines
- Radio equipment
