MAX15004AAUE/V+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2002 |
| Series | Automotive, AEC-Q100 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | IT CAN ALSO OPERATE WITH VOLTAGE MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX15004 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 100V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~40V |
| Control Features | Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 15kHz~500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 50 % |
| Clock Sync | Yes |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
MAX15004AAUE/V+ Overview
Capsuled in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller can be used for a wide range of applications. dc motor controller is suitable for 1 output generation. PMIC is packaged in a solid enclosure of Tube. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control has a supply voltage and operating voltage of 4.5V~40V. A -40°C~125°C TJ dc switcher is not a problem. Switching can be done at 15kHz~500kHz with this switching controller. The Surface Mount allows it to be used for dc dc regulator in general. DCDC regulator is controlled efficiently by Enable, Frequency Control, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. A switching converters's terminal (s) sits at the DUAL position. A variety of dc switching's functions can be performed on 16 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 14V. Search for "MAX15004" to find other relevant dc to dc converter ics. The type is a particular Switching Regulator or Controllers of switching converter. 4.5V should be the minimum input voltage for the dc dc voltage regulator. According to the test statistics, DC regulator outputs 100V voltage. normally, the dc dc regulator's output current is 1A, which you should keep in mind when starting a project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 50 %. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. DC regulator has a maximum frequency of 1MHz. For better satisfaction, the value of DC to DC voltage regulator is IT CAN ALSO OPERATE WITH VOLTAGE MODE. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 40V. There are several dc to dc voltage regulator in the Automotive, AEC-Q100 series.
MAX15004AAUE/V+ Features
Transistor Driver Outputs
Switching Frequency: 15kHz~500kHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
IT CAN ALSO OPERATE WITH VOLTAGE MODE
MAX15004AAUE/V+ Applications
There are a lot of Maxim Integrated MAX15004AAUE/V+ DC to DC converter applications.
- Product burn-in
- Injection molding machinery
- Machining centers
- Domestic water pumps
- Current source circuits
- Combined machine tools
- Smoke exhaust equipment
- Handheld GPS
- Lathes
- Arc suppression circuits
