MAX15004BAUE+

16 Terminals 4.5V~40V 16-Pin MAX15004 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 15kHz~500kHz Transistor Driver

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX15004BAUE+
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 123
Description: 16 Terminals 4.5V~40V 16-Pin MAX15004 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 15kHz~500kHz Transistor Driver (Kg)

Inquiry Now

Details

Tags

Parameters
Control Features	Enable, Frequency Control, Soft Start
Input Voltage (Min)	4.5V
Topology	Boost, Flyback, SEPIC
Control Mode	CURRENT-MODE
Frequency - Switching	15kHz~500kHz
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	No
Switcher Configuration	SINGLE
Max Frequency	1MHz
Max Duty Cycle	50 %
Clock Sync	Yes
Length	5mm
Width	4.4mm
RoHS Status	ROHS3 Compliant
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~125°C TJ
Packaging	Tube
Published	2012
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Additional Feature	IT CAN ALSO OPERATE WITH VOLTAGE MODE
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.65mm
Base Part Number	MAX15004
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	100V
Output Type	Transistor Driver
Operating Supply Voltage	40V
Input Voltage-Nom	14V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive, Isolation Capable
Output Current	1A
Voltage - Supply (Vcc/Vdd)	4.5V~40V

MAX15004BAUE+ Overview

The switching controller fits in the 16-TSSOP (0.173, 4.40mm Width) package and is ideal for most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. There are Transistor Driver dc switching's output (s) that it can handle. This dc control operates at 4.5V~40V and has a 4.5V~40V supply voltage. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. It can switch at 15kHz~500kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Soft Start. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a terminal (s) on the switching converters that are designed at DUAL. The 16 terminations can be used for a wide range of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. A DC switcher's nominal voltage of 14V is input. You can find other relevant dc to dc converter ics by searching "MAX15004". In total, switching converter has 16 pins. Switching converter is a type of Switching Regulator or Controllers in particular. The minimum input voltage of the dc dc voltage regulator should be 4.5V. According to the test statistics, DC regulator outputs 100V voltage. The dc dc regulator's usual output current is 1A, which should be noted down when you start a project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 50 %. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. There is a maximum frequency of 1MHz on this dc regulators. In order to satisfy the need, DC to DC voltage regulator has a value of IT CAN ALSO OPERATE WITH VOLTAGE MODE. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 40V.

MAX15004BAUE+ Features

Transistor Driver Outputs
Switching Frequency: 15kHz~500kHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
IT CAN ALSO OPERATE WITH VOLTAGE MODE