MAX15012AASA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470.6mW |
| Technology | BICMOS |
| Voltage - Supply | 8V~12.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX15012 |
| Pin Count | 8 |
| Max Output Current | 2A |
| Nominal Supply Current | 140μA |
| Output Current | 2A |
| Max Supply Current | 3mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 ns |
| Rise Time | 7ns |
| Fall Time (Typ) | 7 ns |
| Turn-Off Delay Time | 30 ns |
| Rise / Fall Time (Typ) | 65ns 65ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 63 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Turn Off Time | 63 μs |
| High Side Voltage - Max (Bootstrap) | 175V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX15012AASA+ Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.The packaging method is indicated by Tube.The configuration is supported by 2 drivers.Its recommended mounting way is Surface Mount.By using 8V~12.6V supply voltage, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a N-Channel MOSFET gate.The allowable temperature range that this device can be operated in is -40°C~150°C TJ.This program uses the input type of Non-Inverting.It's configured with 8 terminations.There are various parts that can be found under its base part number MAX15012.The device is mounted with Surface Mount.When designing, the device is configured with 8 pins.Mosfet driver is designed specifically to run on 12V volts of power.An output current as high as 2A can be achieved at maximum power.Several electronic components are included in its subcategory of MOSFET Drivers.A total of 8 pins are available for component connections.Maximum (Bootstrap) voltage is 175V.Mosfet driver supports an output current of 2A.According to its maximum power dissipation, 470.6mW is capable of conducting and transferring a large amount of power without overheating.As a precaution, make sure the supply current is kept at 3mA.
MAX15012AASA+ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 175V
Maximum power dissipation of 470.6mW
MAX15012AASA+ Applications
There are a lot of Maxim Integrated MAX15012AASA+ gate drivers applications.
- Solar power supplies
- Motor Controls
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Pulse transformer drivers
- High-speed communications
- Commercial and agricultural vehicles (CAV)
- Commercial air-conditioning (CAC)
- Smart Phones
- Motor controllers
