MAX15012DASA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.5385W |
| Technology | BICMOS |
| Voltage - Supply | 8V~12.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX15012 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Nominal Supply Current | 3mA |
| Max Supply Current | 3mA |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 30 ns |
| Rise Time | 65ns |
| Fall Time (Typ) | 65 ns |
| Turn-Off Delay Time | 30 ns |
| Rise / Fall Time (Typ) | 65ns 65ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 63 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Turn Off Time | 63 μs |
| High Side Voltage - Max (Bootstrap) | 175V |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MAX15012DASA+ Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) Exposed Pad package.Tube is the form of the package.Configuration is based on 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.Using a 8V~12.6V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.Gate type N-Channel MOSFET has been used in its design.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.Input type of Inverting, Non-Inverting is used.The configuration is based on 8 terminations.There are various parts that can be found under its base part number MAX15012.The device is mounted with Surface Mount.When the device is designed, it has 8 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.There is a maximum output current of 2A that can be achieved.There are several useful electronic components in this subcategory of MOSFET Drivers.There are 8 component pins on the board.The high-side voltage - Max (Bootstrap) can be up to 175V.1.5385W dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.To increase stability, keep the supply current at 3mA.
MAX15012DASA+ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 175V
Maximum power dissipation of 1.5385W
MAX15012DASA+ Applications
There are a lot of Maxim Integrated MAX15012DASA+ gate drivers applications.
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Industrial Motor Inverter - Power Tools, Robotics
- Isolated Supplies for controller area network (CAN),
- Portable Media Players
- Power factor correction (PFC) circuits
- Uninterruptible Power Supplies (UPS)
- Digitally controlled power supplies
- High power buffers
- Solar power supplies
- Video amplifiers
