MAX15019BASA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.9W |
| Technology | BICMOS |
| Voltage - Supply | 8V~12.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | MAX15019 |
| Pin Count | 8 |
| Max Output Current | 3A |
| Nominal Supply Current | 190μA |
| Output Current | 3A |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 36 ns |
| Rise Time | 5ns |
| Fall Time (Typ) | 5 ns |
| Turn-Off Delay Time | 36 ns |
| Rise / Fall Time (Typ) | 50ns 40ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 66 µs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 66 µs |
| High Side Voltage - Max (Bootstrap) | 125V |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX15019BASA+ Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) Exposed Pad package is used.A package of Tube has been used.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.In the direction of Surface Mount, gate drivers is mounted.In the absence of a power supply voltage of 8V~12.6V V, it is able to demonstrate its superiority.There is a gate type of N-Channel MOSFET in this design.This device can operate at temperatures up to -40°C~150°C TJ.Inverting, Non-Inverting is used as the input type in this program.There are 8 terminations to form the base of its configuration.Under its base part number MAX15019, various related parts can be found.The mount method is Surface Mount.During design, it is configured with 8 pins.The device is specifically designed to operate at 12V volts.In the maximum case, the output current can be 3A volts.There are several useful electronic components found in its subcategory of MOSFET Drivers.A board with 8 component pins is available.A high-side voltage can be set up to 125V (Bootstrap).The output current supported by the device is 3A.Based on its maximum power dissipation of 1.9W, it is clear that it is capable of transferring and conducting power loss without overheating.
MAX15019BASA+ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 125V
Maximum power dissipation of 1.9W
MAX15019BASA+ Applications
There are a lot of Maxim Integrated MAX15019BASA+ gate drivers applications.
- Solar power supplies
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- RGB applications
- Commercial and agricultural vehicles (CAV)
- Portable Navigation Devices
- Power factor correction (PFC) circuits
- Commercial air-conditioning (CAC)
- Multicolor LED/laser displays
- Head-up and Head mounted displays
- Telecom switch mode power supplies
