MAX1501ETE+
| Parameters | |
|---|---|
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1501 |
| Pin Count | 16 |
| Output Voltage | 4.5V |
| Operating Supply Voltage | 13V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 5mA |
| Output Current | 1.4A |
| Adjustable Threshold | YES |
| Max Output Voltage | 3.3V |
| Supply Current-Max (Isup) | 8mA |
| Nominal Input Voltage | 13V |
| Min Output Voltage | 2.7V |
| Fault Protection | Over Voltage |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 1 ~ 3 |
| Voltage - Supply (Max) | 6.25V |
| Current - Charging | Constant - Programmable |
| Height | 5.1mm |
| Length | 5.1mm |
| Width | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
MAX1501ETE+ Overview
This item can be found in the Tube package.The 16-WQFN Exposed Pad package includes it as a convenience.In this case, the device has a mounting type of Surface Mount.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The device relies on an analog IC called POWER SUPPLY SUPPORT CIRCUIT to operate.The device requires Constant - Programmable of current to charge.This part number MAX1501 can be used to find its related parts.It contains a total of 16 terminations.Pins 16 are included.There are 16 pins required in order for the product to function.The number of available channels is 1.In general, it is recommended to use devices with 6.25V maximum supply voltages.In theory, it should be able to run on a battery that has a voltage of 5VV.Ideally, when the output voltage of the device is set to 4.5V, you will be able to achieve the highest degree of efficiency.It is in this instance that the device's output current is set to 1.4A.The device you are looking at belongs to the subcategory of Power Management Circuits.It is mounted in the manner of Surface Mount.During the design process, Vsup (maximum supply voltage) was set to 8mA.Regarding the power supply for the part, it is set to 5V.Current is flowing through the gadget's supply at 5mA volts.For best efficiency, set the supply voltage to 13V.It is important to note that the maximum output supply voltage for this operation must be set to 3.3V.
MAX1501ETE+ Features
1 channels
Power Management Circuits subcategory
16-WQFN Exposed Pad package
MAX1501ETE+ Applications
There are a lot of Maxim Integrated MAX1501ETE+ Battery Chargers ICs applications.
- Portable devices
- Trash compactors
- PDAs
- Solar charging
- Electrical Utility industry
- Tablets
- High end, feature-rich consumer
- Smart speakers
- Portable medical instruments
- Rental fleets
