MAX15023ETG+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX15023 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.2V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~28V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good |
| Topology | Buck |
| Min Input Voltage | 5.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz~1MHz |
| Max Input Voltage | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Dropout Voltage | 70mV |
| Switcher Configuration | PHASE-SHIFT |
| Max Duty Cycle | 87.5 % |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MAX15023ETG+ Overview
With its 24-WFQFN Exposed Pad package, the switching controller fits the needs of most applications. 2 outputs can be generated with the dc motor controller. A solid enclosure of Tube surrounds pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sdc controls with 4.5V~28V voltage are supplied and operated. Work well in dc switchers with a -40°C~85°C TA. In this switching controller, the switch can be set to 200kHz~1MHz. Surface Mount makes it suitable for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, Frequency Control, Power Good is included in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type DUAL SWITCHING CONTROLLER. Switching converters are designed with the terminal (s) at position QUAD . There are many different types of terminations for 24. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. MAX15023 can be searched for other relevant dc to dc converter ics. There are a total of 24 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. Based on the test statistics, DC regulator outputs voltage 5.2V. In most cases, the output current of the dc dc regulator will be 15A, so note that when you start the project. Voltage regulator dc to dc is designed to operate at 87.5 % duty cycle during power-ups and power-downs to ensure reliability. The Surface Mount makes DC switcher suitable for most applications and prototypes. There is 1MHz frequency setting on the switching controller. In order to ensure the dc switcher's functionality, users must limit the voltage to 28V due to the dc switcher's maximum input voltage. A voltage of 5.5V is required for the supply.
MAX15023ETG+ Features
Transistor Driver Outputs
Switching Frequency: 200kHz~1MHz
Current Limit, Enable, Frequency Control, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 87.5 %
Frequency: 1MHz
MAX15023ETG+ Applications
There are a lot of Maxim Integrated MAX15023ETG+ DC to DC converter applications.
- Various precision measuring detectors
- Cutting machine tools
- Digital video recorders
- Driver circuits
- Game consoles
- Overvoltage protection circuits in TV sets
- Textile machinery
- CNC system
- Imported equipment
- Surface processing equipment
