MAX15024AATB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.4815W |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~28V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX15024 |
| Pin Count | 10 |
| Max Output Current | 8A |
| Nominal Supply Current | 1.5mA |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 18 ns |
| Rise Time | 24ns |
| Fall Time (Typ) | 16 ns |
| Turn-Off Delay Time | 18 ns |
| Rise / Fall Time (Typ) | 22ns 16ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.032 μs |
| Output Peak Current Limit-Nom | 8A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 8A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.032 μs |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX15024AATB+T Overview
The 10-WFDFN Exposed Pad package provides greater flexibility.Tape & Reel (TR) represents the packaging method.This configuration includes 1 drivers.The device is mounted in the direction of Surface Mount.In the absence of a 4.5V~28V supply voltage, it can demonstrate its superiority.The gate type on this device is N-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Mosfet driver uses Inverting, Non-Inverting as Mosfet drivers input type.10 terminations constitute its foundation.There are various related parts under its base part number MAX15024.Mounting the device requires Surface Mount.In the device, there are 10 pins.In addition, it is specifically designed to operate with a supply voltage of 10V.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible for the output current to be as low as 8A.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.A board with 10 component pins is available.Its maximum power dissipation of 1.4815W also demonstrates its maximum ability to transfer power without overheating.Among the Automotive, AEC-Q100 series, this gate driver is included.
MAX15024AATB+T Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel MOSFET
10 pins
Maximum power dissipation of 1.4815W
Operating with the supply voltage of Automotive, AEC-Q100
MAX15024AATB+T Applications
There are a lot of Maxim Integrated MAX15024AATB+T gate drivers applications.
- Isolated Supplies for Motor Control
- UPS systems
- General Purpose 3-Phase Inverter
- Dual-Battery Systems
- AC-DC Inverters
- Telecom switch mode power supplies
- Topologies
- Industrial Power Supplies
- Isolated Supplies for controller area network (CAN),
- Industrial Modules
