MAX15024AATB/V+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.4815W |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~28V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX15024 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Max Output Current | 8A |
| Nominal Supply Current | 1.5mA |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 18 ns |
| Rise Time | 24ns |
| Fall Time (Typ) | 16 ns |
| Turn-Off Delay Time | 18 ns |
| Rise / Fall Time (Typ) | 22ns 16ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.032 µs |
| Output Peak Current Limit-Nom | 8A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 8A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.032 µs |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX15024AATB/V+T Overview
For greater flexibility, its 10-WFDFN Exposed Pad package is used.Tape & Reel (TR) is the form of the package.A total of 1 drivers are integrated into its configuration.Surface Mount is mounted in the way.By using 4.5V~28V supply voltage, it is able to demonstrate its superiority.The gate type on this device is N-Channel MOSFET.For this device, the temperature range is -40°C~150°C TJ.A type of Inverting, Non-Inverting is used for input in this program.It's configured with 10 terminations.There are various parts that can be found under its base part number MAX15024.Mosfet driver is mounted using Surface Mount.At the time of design, it is configured with 10 pins.A voltage of 10V is required for its operation.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.There is a maximum output current of 8A that can be achieved.There are several useful electronic components found in its subcategory of MOSFET Drivers.On the board, there are 10 component pins.The maximum power dissipation of 1.4815W shows its maximum capability to transfer and conduct power loss without overheating.This gate driver is included into Automotive, AEC-Q100 series.
MAX15024AATB/V+T Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel MOSFET
10 pins
Maximum power dissipation of 1.4815W
Operating with the supply voltage of Automotive, AEC-Q100
MAX15024AATB/V+T Applications
There are a lot of Maxim Integrated MAX15024AATB/V+T gate drivers applications.
- Commercial air-conditioning (CAC)
- DC-DC Converters
- AC-DC Inverters
- Isolated Supplies for Motor Control
- Head-up and Head mounted displays
- High frequency line drivers
- High power buffers
- serial peripheral interface (SPI), I2C
- Active Clamp Flyback or Forward and Synchronous Rectifier
- A/D drivers
