MAX15024BATB+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.4815W |
| Technology | BICMOS |
| Voltage - Supply | 6.5V~28V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX15024 |
| Pin Count | 10 |
| Max Output Current | 8A |
| Nominal Supply Current | 1.5mA |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 18 ns |
| Rise Time | 24ns |
| Fall Time (Typ) | 16 ns |
| Turn-Off Delay Time | 18 ns |
| Rise / Fall Time (Typ) | 24ns 16ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.032 µs |
| Output Peak Current Limit-Nom | 8A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 8A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 2V 4.25V |
| Turn Off Time | 0.032 µs |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX15024BATB+T Overview
The 10-WFDFN Exposed Pad package provides greater flexibility.The packaging method is indicated by Tape & Reel (TR).There are 1 drivers installed for this device.It's mounted on the way to Surface Mount.A supply voltage of 6.5V~28V demonstrates its superiority.Gate drivers is designed wGate driversh a gate type of N-Channel MOSFET.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.Inverting, Non-Inverting is the input type used in this program.There are 10 terminations to form the base of its configuration.Mosfet driver is possible to find various related parts under Mosfet drivers base part number MAX15024.In this case, Surface Mount indicates how the device is mounted.Mosfet driver is configured wMosfet driverh 10 pins when designing.In addition, it is specifically designed to operate with a supply voltage of 10V.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 8A that can be achieved.There are several useful electronic components found in its subcategory of MOSFET Drivers.There are 10 component pins on the board.The maximum power dissipation of 1.4815W shows its maximum capability to transfer and conduct power loss without overheating.There are several gate drivers in the Automotive, AEC-Q100 series, including this one.
MAX15024BATB+T Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel MOSFET
10 pins
Maximum power dissipation of 1.4815W
Operating with the supply voltage of Automotive, AEC-Q100
MAX15024BATB+T Applications
There are a lot of Maxim Integrated MAX15024BATB+T gate drivers applications.
- High frequency line drivers
- Industrial motor drives - compact, standard, premium, servo drives
- Power factor correction (PFC) circuits
- UPS systems
- General Purpose 3-Phase Inverter
- Isolated Supplies for controller area network (CAN),
- Uninterruptible Power Supplies (UPS)
- Topologies
- High current laser/LED systems
- White Goods - Air Conditioner, Washing Machine,
