MAX15025AATB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.48W |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~28V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX15025 |
| Pin Count | 10 |
| Max Output Current | 4A |
| Operating Supply Voltage | 10V |
| Nominal Supply Current | 1.35mA |
| Output Current | 4A |
| Input Type | Non-Inverting |
| Turn On Delay Time | 18 ns |
| Output Characteristics | OPEN-DRAIN |
| Rise Time | 6ns |
| Fall Time (Typ) | 5 ns |
| Turn-Off Delay Time | 18 ns |
| Rise / Fall Time (Typ) | 42ns 30ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX15025AATB+T Overview
A higher degree of flexibility is achieved by adopting its 10-WFDFN Exposed Pad package.Tape & Reel (TR) is the form of the package.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.Surface Mount is mounted in the way of the device.When the supply voltage is set to 4.5V~28V, it can demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of N-Channel MOSFET.There is a temperature range for this device of -40°C~150°C TJ.Mosfet driver accepts input of type Non-Inverting.Mosfet driver consists of 10 terminations as Mosfet drivers foundation.You will find various related parts under the base part number MAX15025.Devices are mounted by Surface Mount.During design, it is configured with 10 pins.The device is specifically designed to function with a supply voltage of 10V V.HALF BRIDGE BASED MOSFET DRIVER is employed as its interface IC.An output current as high as 4A can be achieved at maximum power.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.Components with 10 pins are available.An output current of 4A is supported.This device has a maximum power dissipation of 1.48W, indicating that it is capable of reducing power loss without overheating.The operating supply voltage should be set at 10V.Gate drivers in this series are included in the Automotive, AEC-Q100 series.
MAX15025AATB+T Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
Maximum power dissipation of 1.48W
Operating with the supply voltage of Automotive, AEC-Q100
MAX15025AATB+T Applications
There are a lot of Maxim Integrated MAX15025AATB+T gate drivers applications.
- Topologies
- A/D drivers
- High-voltage isolated DC-DC converters
- Active Clamp Flyback or Forward and Synchronous Rectifier
- LCD/LCoS/DLP portable and embedded pico projectors
- High current laser/LED systems
- Solar power supplies
- High power buffers
- DC/DC converters
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
