Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
10-WFDFN Exposed Pad |
Number of Pins |
10 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2011 |
Series |
Automotive, AEC-Q100 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
MOSFET Drivers |
Max Power Dissipation |
1.4815W |
Technology |
BICMOS |
Voltage - Supply |
6.5V~28V |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
10V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
MAX15025 |
Pin Count |
10 |
Max Output Current |
4A |
Operating Supply Voltage |
6.5V |
Nominal Supply Current |
1.5mA |
Input Type |
Inverting, Non-Inverting |
Turn On Delay Time |
18 ns |
Rise Time |
48ns |
Fall Time (Typ) |
32 ns |
Turn-Off Delay Time |
18 ns |
Rise / Fall Time (Typ) |
48ns 32ns |
Interface IC Type |
HALF BRIDGE BASED MOSFET DRIVER |
Channel Type |
Independent |
Number of Drivers |
2 |
Output Peak Current Limit-Nom |
4A |
Driven Configuration |
Low-Side |
Gate Type |
N-Channel MOSFET |
Current - Peak Output (Source, Sink) |
2A 4A |
High Side Driver |
NO |
Logic Voltage - VIL, VIH |
2V 4.25V |
Height Seated (Max) |
0.8mm |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
MAX15025BATB+T Overview
A higher degree of flexibility is achieved by adopting its 10-WFDFN Exposed Pad package.The packaging method is indicated by Tape & Reel (TR).Configuration is based on 2 drivers.Gate drivers is mounted in the way of Surface Mount.When the supply voltage is 6.5V~28V it is able to demonstrate its superiority.Gate type N-Channel MOSFET has been used in its design.This device can operate at temperatures up to -40°C~150°C TJ.Inverting, Non-Inverting is used as the input type in this program.The configuration is based on 10 terminations.The base part number MAX15025 refers to a number of related parts.The device is mounted with Surface Mount.During design, it is configured with 10 pins.Mosfet driver is designed specifically to run on 10V volts of power.As its interface IC, HALF BRIDGE BASED MOSFET DRIVER is being employed.In the maximum case, the output current can be limited to 4A.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.A board with 10 component pins is available.Considering its maximum power dissipation, 1.4815W shows its maximum capacity to transfer and conduct power loss without overheating.Mosfet gate drivers is recommended that the operating supply voltage be set to 6.5V volts.There are several gate drivers in the Automotive, AEC-Q100 series, including this one.
MAX15025BATB+T Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
Maximum power dissipation of 1.4815W
Operating with the supply voltage of Automotive, AEC-Q100
MAX15025BATB+T Applications
There are a lot of Maxim Integrated MAX15025BATB+T gate drivers applications.
- Video amplifiers
- Motor Drives
- Industrial Modules
- Isolated Supplies for Motor Control
- RGB applications
- 3-Phase Motor Inverter Driver
- Motor Controls
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Portable Media Players
- White Goods - Air Conditioner, Washing Machine,