MAX15025FATB+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.4815W |
| Technology | BICMOS |
| Voltage - Supply | 6.5V~28V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX15025 |
| Pin Count | 10 |
| JESD-30 Code | S-XDSO-N10 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6.5V |
| Power Supplies | 10V |
| Nominal Supply Current | 1.5mA |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 18 ns |
| Rise Time | 48ns |
| Fall Time (Typ) | 32 ns |
| Turn-Off Delay Time | 18 ns |
| Rise / Fall Time (Typ) | 48ns 32ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 4A |
| High Side Driver | NO |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX15025FATB+T Overview
A higher level of flexibility is provided by its 10-WFDFN Exposed Pad package.A packaging method of Tape & Reel (TR) is indicated.This configuration includes 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.Using a 6.5V~28V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.This gate type has a N-Channel MOSFET design.There is a temperature range for this device of -40°C~150°C TJ.Inverting, Non-Inverting is used as its input type.Its configuration starts with 10 terminations.There are various related parts under its base part number MAX15025.You mount it with Surface Mount.With a supply voltage of 10V, it is designed to operate.HALF BRIDGE BASED MOSFET DRIVER is employed as its interface IC.There are several useful electronic components found in its subcategory of MOSFET Drivers.The board has 10 component pins.1.4815W dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.The power supply of 10V is able to solve the power supply problems for a wide variety of applications.Mosfet gate drivers is recommended that you set the operating supply voltage to 6.5V.
MAX15025FATB+T Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
Maximum power dissipation of 1.4815W
MAX15025FATB+T Applications
There are a lot of Maxim Integrated MAX15025FATB+T gate drivers applications.
- Automotive Applications
- High frequency line drivers
- Commercial and agricultural vehicles (CAV)
- UPS systems
- Welding
- Motor Drives
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Commercial air-conditioning (CAC)
- Portable Navigation Devices
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
