MAX15025HATB+T
| Parameters | |
|---|---|
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX15025 |
| Pin Count | 10 |
| JESD-30 Code | S-XDSO-N10 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6.5V |
| Power Supplies | 10V |
| Nominal Supply Current | 1.5mA |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 18 ns |
| Rise Time | 48ns |
| Fall Time (Typ) | 32 ns |
| Turn-Off Delay Time | 18 ns |
| Rise / Fall Time (Typ) | 48ns 32ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 4A |
| High Side Driver | NO |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.4815W |
| Technology | BICMOS |
| Voltage - Supply | 6.5V~28V |
| Terminal Position | DUAL |
MAX15025HATB+T Overview
There is greater flexibility with the 10-WFDFN Exposed Pad package.Gate drivers is package in Tape & Reel (TR) case.Configuration is based on 2 drivers.Surface Mount is mounted in the way of the device.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 6.5V~28V supply voltage.N-Channel MOSFET is the gate type used for this design.In this device, temperatures must not exceed -40°C~150°C TJ.Mosfet driver accepts input of type Inverting, Non-Inverting.Mosfet driver is based on 10 terminations.Numerous related parts are available for its base part number MAX15025.The mount method is Surface Mount.A supply voltage of 10V is required for operation.Its interface IC is HALF BRIDGE BASED MOSFET DRIVER.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The board contains 10 pins for component connections.Based on its maximum power dissipation of 1.4815W, it is clear that it is capable of transferring and conducting power loss without overheating.Due to its power supplies of 10V, it solves the power supply problem for a wide range of applications.The operating supply voltage should be set at 6.5V.
MAX15025HATB+T Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
Maximum power dissipation of 1.4815W
MAX15025HATB+T Applications
There are a lot of Maxim Integrated MAX15025HATB+T gate drivers applications.
- Multicolor LED/laser displays
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Refrigerator
- LCD/LCoS/DLP portable and embedded pico projectors
- Commercial air-conditioning (CAC)
- Industrial motor drives - compact, standard, premium, servo drives
- PCMCIA applications
- Video amplifiers
- Head-up and Head mounted displays
- Dual-Battery Systems
