MAX15026CETD+G1D
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-WFDFN Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 23.8V |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 0.4mm |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 23.8V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~28V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz~2MHz |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 88% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX15026CETD+G1D Overview
The switching controller fits in the 14-WFDFN Exposed Pad package and is ideal for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Packaging for the pmic consists of Tube solid enclosures. The system can process Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 4.5V~28V. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. There is a switch at 200kHz~2MHz that can be used with this controller. Surface Mount makes it suitable for general dc dc regulator. Current Limit, Enable, Frequency Control, Power Good is used for efficient switching control in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Switching converters are designed with the terminal (s) at position DUAL . The 14 terminations can be used for a wide range of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. There are 14 pins on switching converter. Input voltage of dc dc voltage regulator should be 4.5V. DC regulator outputs 23.8V voltage according to the test statistics. Considering the dc to dc regulator can only accept 28V input voltage, it is important to take note of this. In most cases, the dc dc regulator's output current is 4A. This information should be noted when you begin working with the component. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. The value of DC to DC voltage regulator is set at ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 23.8V in order to fulfill the requirements more effectively. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 5.5V.
MAX15026CETD+G1D Features
Transistor Driver Outputs
Switching Frequency: 200kHz~2MHz
Current Limit, Enable, Frequency Control, Power Good
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 23.8V
MAX15026CETD+G1D Applications
There are a lot of Maxim Integrated MAX15026CETD+G1D DC to DC converter applications.
- Energy management systems
- Thermal power
- Precision electronic equipment
- Printing equipment
- Computer rooms
- Electric water heaters
- Nuclear power plants
- Wind power
- Magnetohydrodynamic power
- Driver circuits
