MAX15026CETD+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-WFDFN Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 23.8V |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 0.4mm |
| Base Part Number | MAX15026 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 28V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~28V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz~2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 2.4MHz |
| Max Duty Cycle | 88 % |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX15026CETD+T Overview
It comes in a 14-WFDFN Exposed Pad package, so switching controller can be used for most applications. The dc motor controller is adquate to generate for 1 outputs. PMIC is packaged in a solid enclosure of Tape & Reel (TR). A total of Transistor Driver dc switching's outputs can be handled by it. Voltages 4.5V~28V are the dc control's supply voltage and operating voltage, respectively. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. With this switching controller, you can switch at 200kHz~2MHz. The Surface Mount allows it to be used for dc dc regulator in general. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Frequency Control, Power Good. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. Various 14 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. MAX15026 can be used to locate other relevant dc to dc converter ics. 14 pins are on switching converter. An input voltage of 4.5V is the minimum required for the dc dc voltage regulator. DC regulator outputs 28V voltage according to the test statistics. It's important to remember that the dc dc regulator's normaloutput current is 15A, so you should note it down when starting a new project. A duty cycle set at 88 % ensures voltage regulator dc to dc reliability during power-on and power-off. DC switcher's Surface Mount qualifies it for most applications and prototypes. This dc regulatorhas a max frequency of 2.4MHz. The value of DC to DC voltage regulator is set to ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 23.8V in order to better satisfy the requirement. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 5.5V.
MAX15026CETD+T Features
Transistor Driver Outputs
Switching Frequency: 200kHz~2MHz
Current Limit, Enable, Frequency Control, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 88 %
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 23.8V
MAX15026CETD+T Applications
There are a lot of Maxim Integrated MAX15026CETD+T DC to DC converter applications.
- Ball screw pair
- Window air conditioners
- Computer rooms
- ATMs
- Arc suppression circuits
- Grinders
- Post equipment
- Constant current circuits
- Hydraulic presses
- Alternators
