MAX15026DATD+T
| Parameters | |
|---|---|
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-WFDFN Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 23.8V |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 0.4mm |
| Base Part Number | MAX15026 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 28V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~28V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz~2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 2.4MHz |
| Max Duty Cycle | 88 % |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
MAX15026DATD+T Overview
Capsuled in the 14-WFDFN Exposed Pad package, the switching controller can be used for a wide range of applications. 1 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). The system can process Transistor Driver dc switching's outputs (s). 4.5V~28V is the supply voltage and the operating voltage of the dc control. Work well in dc switchers with a -40°C~125°C TJ. There is a switch at 200kHz~2MHz that can be used with this controller. dc dc regulator can be generalized using Surface Mount. For efficient switching control, the dcdc regulator features Current Limit, Enable, Frequency Control, Power Good. An analog IC SWITCHING CONTROLLER is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. 14 terminations with various dc switching's functions. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. MAX15026 can be searched for other relevant dc to dc converter ics. There are only 14 pins on switching converter. dc dc voltage regulators should have a minimum input voltage of 4.5V. Test statistics indicate DC regulator outputs 28V voltage. You should note down the dc dc regulator's usual output current of 15A when you start a project. The maximum duty cycle of this voltage regulator dc to dc is set to 88 % to ensure reliability during power-up and power-down. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. The max frequency of the pmic can reach 2.4MHz. This value is ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 23.8V so that DC to DC voltage regulator better serves the purpose. Users should apply 5.5V to operate the voltage regulator dc to dc safely and reliably.
MAX15026DATD+T Features
Transistor Driver Outputs
Switching Frequency: 200kHz~2MHz
Current Limit, Enable, Frequency Control, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 88 %
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 23.8V
MAX15026DATD+T Applications
There are a lot of Maxim Integrated MAX15026DATD+T DC to DC converter applications.
- Computer application technology
- Sink circuits
- Lathes
- Hydro power
- Boring machines
- ATMs
- Overvoltage protection circuits in TV sets
- Grinders
- Bending machines
- Balance equipment
