MAX15034AAUI+
| Parameters | |
|---|---|
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.75V~5.5V 5V~28V |
| Control Features | Enable, Frequency Control |
| Input Voltage (Min) | 5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Dropout Voltage | 500mV |
| Switcher Configuration | PHASE-SHIFT |
| Max Duty Cycle | 93.75 % |
| Clock Sync | No |
| Height Seated (Max) | 1.1mm |
| Length | 9.7mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2008 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | MAX15034 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
MAX15034AAUI+ Overview
As a result of 28-TSSOP (0.173, 4.40mm Width) compact design, the switching controller is compatible with most applications. It is sufficient to generate 2 outputs with this dc motor controller. PMIC is packaged in a solid enclosure of Tube. Transistor Driver dc switching's outputs (s) can be handled by it. Voltages 4.75V~5.5V 5V~28V are the dc control's supply voltage and operating voltage, respectively. A -40°C~125°C TJ dc switcher is not a problem. Using this switching controller, it is possible to switch at 100kHz~1MHz. The Surface Mount makes it ideal for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Enable, Frequency Control. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. Switching converters are designed with the terminal (s) at position DUAL . An array of 28 terminations of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. 5V nominal DC switcher's voltage input. Search for "MAX15034" to find other relevant dc to dc converter ics. 28 pins are present on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. dc dc voltage regulators should have a minimum input voltage of 5V. The test statistics indicate that DC regulator outputs a voltage of 5.5V. A starting point for a project is to note down the dc dc regulator's usual output current, which is 25A. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 93.75 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. There is 1MHz frequency setting on the switching controller.
MAX15034AAUI+ Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 93.75 %
Frequency: 1MHz
MAX15034AAUI+ Applications
There are a lot of Maxim Integrated MAX15034AAUI+ DC to DC converter applications.
- Overvoltage protection circuits in TV sets
- Energy management systems
- CMM
- Injection molding machinery
- Adjustable voltage or current linear circuits
- Constant current circuits
- Shearing machines
- Ball screw pair
- Radio equipment
- Product burn-in
