MAX15046CAEE+
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-LSSOP (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2012 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | OUTPUT IS ADJUSTABLE FROM 0.6V TO 34V; ALSO OPERATES WITH 4.5V TO 5.5V SUPPLY |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.635mm |
| Base Part Number | MAX15046 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.25V |
| Output Type | Transistor Driver |
| Max Output Current | 25A |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~40V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good |
| Max Output Voltage | 5.5V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~1MHz |
| Max Input Voltage | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 5V |
| Max Duty Cycle | 87.5 % |
| Clock Sync | No |
| Height | 1.55mm |
| Length | 4.98mm |
| Width | 3.99mm |
| RoHS Status | ROHS3 Compliant |
MAX15046CAEE+ Overview
As a result of 16-LSSOP (0.154, 3.90mm Width) Exposed Pad compact design, the switching controller is compatible with most applications. 1 outputs can be generated with the dc motor controller. Tube is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) can be handled by it. dc control's supply and operating voltages are 4.5V~40V. Worked in an dc switcher with a -40°C~125°C TJ rating. There is a switch at 100kHz~1MHz that can be used with this controller. The Surface Mount makes it ideal for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Frequency Control, Power Good. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a terminal (s) on the switching converters that are designed at DUAL. 16 terminations with a variety of function. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. It is inputted with a DC switcher's voltage of 24V. Searching "MAX15046" will return other relevant dc to dc converter ics. Switching converter has a total of 16 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 5.25V. The dc dc regulator's usual output current is 25A, which should be noted down when you start a project. The maximum duty cycle of this voltage regulator dc to dc is set to 87.5 % to ensure reliability during power-up and power-down. DC switcher's Surface Mount qualifies it for most applications and prototypes. The value of DC to DC voltage regulator is set to OUTPUT IS ADJUSTABLE FROM 0.6V TO 34V; ALSO OPERATES WITH 4.5V TO 5.5V SUPPLY in order to better satisfy the requirement. The dc switcher's maximum input voltage is 40V; users must limit it accordingly. 4.5V is the required supply voltage. Input current cannot exceed 25A with this dc switcher. Depending on the datasheet, the switching converter can output 5.5V volts at its peak. Its lowest voltage output is not less than 5V.
MAX15046CAEE+ Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Current Limit, Enable, Frequency Control, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 87.5 %
OUTPUT IS ADJUSTABLE FROM 0.6V TO 34V; ALSO OPERATES WITH 4.5V TO 5.5V SUPPLY
MAX15046CAEE+ Applications
There are a lot of Maxim Integrated MAX15046CAEE+ DC to DC converter applications.
- Flexible manufacturing cells
- Magnetohydrodynamic power
- Bending machines
- Computer rooms
- Post equipment
- Electrical power transmission
- Milling machines
- Constant current circuits
- Program control systems
- Smoke exhaust equipment
