banner_page

MAX15091AETI+

Tray Active 1 Surface Mount Hot Swap Controllers Auto Retry, Thermal Limit 28-WFQFN Exposed Pad 1 General Purpose Hot Swap Controller


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX15091AETI+
  • Package: 28-WFQFN Exposed Pad
  • Datasheet: PDF
  • Stock: 623
  • Description: Tray Active 1 Surface Mount Hot Swap Controllers Auto Retry, Thermal Limit 28-WFQFN Exposed Pad 1 General Purpose Hot Swap Controller (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 28-WFQFN Exposed Pad
Number of Pins 28
Operating Temperature -40°C~85°C
Packaging Tray
Published 2015
Feature Auto Retry, Thermal Limit
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 28
ECCN Code EAR99
Type Hot Swap Controller
Applications General Purpose
Subcategory Power Management Circuits
Technology BICMOS
Voltage - Supply 2.7V~18V
Terminal Position QUAD
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 3V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Qualification Status Not Qualified
Max Output Current 9A
Operating Supply Voltage 12V
Supply Voltage-Min (Vsup) 2.7V
Number of Channels 1
Operating Supply Current 400μA
Max Supply Current 3.6mA
Internal Switch(s) Yes
Programmable Features Circuit Breaker, Current Limit, Fault Timeout, OVP, Slew Rate, UVLO
Feature Pins CB, CDLY, /FAULT, ISENSE, OV, PG, REG, UV
Height Seated (Max) 0.8mm
Length 5mm
Width 5mm
RoHS Status ROHS3 Compliant

MAX15091AETI+ Overview


You can find it in the 28-WFQFN Exposed Pad package.Currently, 1 channels can be accessed.Tray-shaped packaging is used for this product.The terminations total 28.In this case, the device is located at terminal QUAD.High efficiency can be achieved when the supply voltage is 3V.As Surface Mount would say, it's set up like that.Hot Swap Controller?is?the?classification?for?this?electrical?component.For reliable operation, set the temperature to -40°C~85°C.General Purpose applications can be downloaded from the device.Hot-swappable device is featured in Auto Retry, Thermal Limit.Using a 2.7V~18VV power source should be able to power the device.Operating the device requires 28 pins.There is nothing else in Power Management Circuits but this gadget.The programmable features of this device are Circuit Breaker, Current Limit, Fault Timeout, OVP, Slew Rate, UVLO.In Surface Mount direction, it is positioned.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 2.7V so that the device can function normally.There is an operative supply current called 400μA.When operating criteria are met, the maximum output current is reduced to 9A.The maximum current required for its operation is {0}.

MAX15091AETI+ Features


Features of Auto Retry, Thermal Limit
Programmable features of Circuit Breaker, Current Limit, Fault Timeout, OVP, Slew Rate, UVLO

MAX15091AETI+ Applications


There are a lot of Maxim Integrated MAX15091AETI+ hot swap controllers applications.

  • Safe board insertion and extraction
  • Current monitor output
  • Reverse current protection
  • Redundant negative voltage supplies
  • Limitting the inrush current
  • Industrial application
  • Supply voltage monitoring
  • Avionics systems
  • Backplane
  • Network switch

Write a review

Note: HTML is not translated!
    Bad           Good