banner_page

MAX15091ETI+

Tube Active 1 Surface Mount Hot Swap Controllers Auto Retry, Thermal Limit 28-WFQFN Exposed Pad 1 General Purpose Hot Swap Controller


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX15091ETI+
  • Package: 28-WFQFN Exposed Pad
  • Datasheet: PDF
  • Stock: 726
  • Description: Tube Active 1 Surface Mount Hot Swap Controllers Auto Retry, Thermal Limit 28-WFQFN Exposed Pad 1 General Purpose Hot Swap Controller (Kg)

Details

Tags

Parameters
Qualification Status Not Qualified
Max Output Current 9A
Operating Supply Voltage 12V
Supply Voltage-Min (Vsup) 2.7V
Number of Channels 1
Operating Supply Current 400μA
Max Supply Current 650μA
Internal Switch(s) Yes
Programmable Features Circuit Breaker, Current Limit, Fault Timeout, OVP, Slew Rate, UVLO
Feature Pins CB, CDLY, /FAULT, ISENSE, OV, PG, REG, UV
Height Seated (Max) 0.8mm
Length 5mm
Width 5mm
RoHS Status ROHS3 Compliant
Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 28-WFQFN Exposed Pad
Number of Pins 28
Operating Temperature -40°C~85°C
Packaging Tube
Published 2015
Feature Auto Retry, Thermal Limit
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 28
ECCN Code EAR99
Type Hot Swap Controller
Applications General Purpose
Subcategory Power Management Circuits
Max Power Dissipation 2.7586W
Technology BICMOS
Voltage - Supply 2.7V~18V
Terminal Position QUAD
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 3V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number MAX15091

MAX15091ETI+ Overview


As part of the 28-WFQFN Exposed Pad package, it is included.At present, 1 channels are available.Tube-shaped packaging is used for this product.In total, it has 28 terminations.In this case, the device is located at terminal QUAD.With a supply voltage of 3V, high efficiency is possible.This is set up in the same way as Surface Mount.This electrical component is classified as Hot Swap Controller.For reliable operation, set the temperature to -40°C~85°C.The device has General Purpose applicationsA feature of Auto Retry, Thermal Limit describes it.Hot-swappable device should work if you use a 2.7V~18VV power source.MAX15091 is a family of numbers.A 28 pin is used for operation.A gadget like this is self-contained in Power Management Circuits.Circuit Breaker, Current Limit, Fault Timeout, OVP, Slew Rate, UVLO is the number of features it can be programmed with.Surface Mount is the direction in which it is positioned.The supply voltage (Vsup) should be kept above 2.7V for normal operation.Hot Swap is 400μA that operates the supply current.In order to meet the operation criteria, the maximum output current must be reduced to 9A.There is a maximum current requirement of 650μA for it to operate.

MAX15091ETI+ Features


Features of Auto Retry, Thermal Limit
Programmable features of Circuit Breaker, Current Limit, Fault Timeout, OVP, Slew Rate, UVLO

MAX15091ETI+ Applications


There are a lot of Maxim Integrated MAX15091ETI+ hot swap controllers applications.

  • Load transient protection
  • Current monitoring
  • Inrush current control
  • Reverse current protection
  • Server backplane system
  • Circuit breakers for electronic circuits
  • Temperature monitor output
  • Raid
  • Overvoltage protection
  • Data communication systems

Write a review

Note: HTML is not translated!
    Bad           Good