MAX1523EUT+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Weight | 36.003894mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 696mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.95mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1523 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 100V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 3.3V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 25μA |
| Output Configuration | Positive |
| Output Current | 950mA |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| Control Features | Enable |
| Topology | Boost, Flyback, SEPIC |
| Min Input Voltage | 2.5V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 5.5V |
| Synchronous Rectifier | No |
| Nominal Input Voltage | 3.3V |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 90 % |
| Duty Cycle (Max) | 85% |
| Max Junction Temperature (Tj) | 150°C |
| Switching Frequency | 1MHz |
| Height | 1.45mm |
| Length | 3mm |
| Width | 1.75mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1523EUT+T Overview
Capsuled in the SOT-23-6 package, the switching controller can be used for a wide range of applications. 1 outputs are supported by the dc motor controller. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) are supported. This dc control has a supply voltage and operating voltage of 2.5V~5.5V. Suitable for working in an dc switcher that has a -40°C~85°C TA. Surface Mount makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Enable which allows efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 6. DC switcher's input voltageis 3.3V volts. A search for "MAX1523" will reveal other relevant dc to dc converter ics. There are 6 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. DC regulator outputs 100V voltage based on test statistics. You should note down the dc dc regulator's usual output current of 950mA when you start a project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 90 %. The Surface Mount makes DC switcher suitable for most applications and prototypes. There is 1MHz frequency setting on the switching controller. To operate the voltage regulator dc to dc safely and reliably, users should apply 5.5V. A nominal working status is achieved when the input voltage is set to 3.3V. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 5.5V. In order to use a 2.5V voltage supply, switching controller is necessary to have one. Switching voltage regulators' nominal current supply is 25μA. At 1MHz, this controller performs best.
MAX1523EUT+T Features
Transistor Driver Outputs
Enable
Max Duty Cycle: 90 %
Frequency: 1MHz
Switching Frequency: 1MHz
MAX1523EUT+T Applications
There are a lot of Maxim Integrated MAX1523EUT+T DC to DC converter applications.
- Computer rooms
- Medical equipment
- Textile machinery
- Digital precision reference circuits
- Alternators
- Grinders
- Nuclear power plants
- Industrial controllers
- CNC system
- Correction machines
