MAX15301AA02+TCJK
| Parameters | |
|---|---|
| Topology | Buck |
| Frequency - Switching | 300kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 95 % |
| Serial Interfaces | PMBus |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.5V TO 5.25V; ALSO OPRATES AT 3.3 VOLT OUTPUT |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX15301 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~14V |
| Control Features | Current Limit, Enable, Power Good |
| Input Voltage (Min) | 4.5V |
MAX15301AA02+TCJK Overview
It comes in a 32-WFQFN Exposed Pad package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. The program can handle Transistor Driver dc switching's outputs (s). This dc control operates at 4.5V~14V and has a 4.5V~14V supply voltage. Suitable for work in a -40°C~85°C TA dc switcher. The switching controller is capable of switching at the 300kHz~1MHz position. The Surface Mount value makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Current Limit, Enable, Power Good. A SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminal (s) are designed at QUAD . Various 32 terminations. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. Search for "MAX15301" to find other relevant dc to dc converter ics. There are 32 pins on switching converter. 4.5V should be the minimum input voltage for the dc dc voltage regulator. DC regulator outputs 1.8V voltage based on test statistics. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 95 % during power-up and power-down. In order to satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.5V TO 5.25V; ALSO OPRATES AT 3.3 VOLT OUTPUT.
MAX15301AA02+TCJK Features
Transistor Driver Outputs
Switching Frequency: 300kHz~1MHz
Current Limit, Enable, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.5V TO 5.25V; ALSO OPRATES AT 3.3 VOLT OUTPUT
MAX15301AA02+TCJK Applications
There are a lot of Maxim Integrated MAX15301AA02+TCJK DC to DC converter applications.
- Plate bending machines
- Program control systems
- Surface processing equipment
- Hydraulic presses
- Shearing machines
- Planers
- Cutting machine tools
- Mobile phones
- Hydrogen power
- Arc suppression circuits
