MAX1541ETL+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-WFQFN Exposed Pad |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1541 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 28V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 7A |
| Voltage - Supply (Vcc/Vdd) | 2V~28V |
| Control Features | Current Limit, Enable, On Time Control, Power Good, Pulse Skipping, Saturation |
| Input Voltage (Min) | 2V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 170kHz~620kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Frequency | 620kHz |
| Max Duty Cycle | 100 % |
| Clock Sync | No |
| Output Phases | 1 |
| Height Seated (Max) | 0.8mm |
| Length | 6mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1541ETL+ Overview
It comes in the 40-WFQFN Exposed Pad package, which makes switching controller suitable for most applications. dc motor controller is suitable for 2 output generation. Packaged in solid enclosures, this pmic has a Tube rating. The program can handle Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 2V~28V. Suitable for work in a -40°C~85°C TA dc switcher. The switching controller is capable of switching at the 170kHz~620kHz position. dc dc regulator is made easier with Surface Mount. Featured in the dcdc regulator is Current Limit, Enable, On Time Control, Power Good, Pulse Skipping, Saturation which allows efficient switching control. DUAL SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminals (s) are designed at QUAD. A variety of 40 terminations are available in dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 15V. Searching "MAX1541" will return other relevant dc to dc converter ics. There are a total of 40 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. This dc dc voltage regulator should be powered by a voltage of 2V. As determined by the test statistics, the output voltage of DC regulator is 5.5V. In most cases, the dc dc regulator's output current is 7A. This information should be noted when you begin working with the component. Voltage regulator dc to dc is designed to operate at 100 % duty cycle during power-ups and power-downs to ensure reliability. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. DC regulators have a maximum frequency of 620kHz. To run the voltage regulator dc to dc safely and reliably, users should apply 28V to the voltage regulator dc to dc.
MAX1541ETL+ Features
Transistor Driver Outputs
Switching Frequency: 170kHz~620kHz
Current Limit, Enable, On Time Control, Power Good, Pulse Skipping, Saturation
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
MAX1541ETL+ Applications
There are a lot of Maxim Integrated MAX1541ETL+ DC to DC converter applications.
- Hydraulic presses
- Game consoles
- Medical monitoring systems
- Imported equipment
- Electrical power transmission
- CNC system
- Thermal power
- Elevator lighting
- Computer application technology
- Servo drive system
