MAX1582ETC+
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 12-WQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| Type | DC DC Regulator |
| Terminal Finish | MATTE TIN |
| Applications | Backlight |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.8mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 12 |
| Number of Outputs | 2 |
| Qualification Status | COMMERCIAL |
| Input Voltage-Nom | 3V |
| Voltage - Output | 25.5V |
| Topology | Step-Up (Boost) |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.95A |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Current - Output / Channel | 950mA Switch |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Voltage - Supply (Max) | 5.5V |
| Voltage - Supply (Min) | 2.6V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
MAX1582ETC+ Overview
As a result of its 12-WQFN Exposed Pad package, it helps to save board space on the board. LED drivers use 2 outputs for their design.This mounting method is Surface Mount.It emerges as a DC DC Regulator with high efficiency.It is capable of operating at a temperature of -40°C~85°C TA. Backlight has many benefits.It operates on the basis of the frequency of 1MHz.It operates with 12 terminations.A voltage supply less than 2.6V will cause undetermined failures.This device produces a voltage of 25.5V volts.In addition, it is equipped with a total of 12 pins.A maximum voltage of 5.5V is optimized for use by this device.While operating the device, the circuit has 3V volts.It is possible to ensure high stability by keeping the input voltage below 5.5V.There should be no more than 0.95A current coming out of the output.
MAX1582ETC+ Features
Available in the 12-WQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
MAX1582ETC+ Applications
There are a lot of Rochester Electronics, LLC MAX1582ETC+ LED Driver ICs applications.
- LED Lighting PFCs, Linear Dimmable
- Auxiliary lights for on-vehicle cameras
- A- lamps
- OLED power supply for portable equipment
- Down lights
- High-end retail lighting
- LED Lightings for Inspection Devices
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Architectural lighting
- General lighting
