MAX1595EUA33+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 387.8mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX1595 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.33V |
| Output Type | Fixed |
| Voltage - Input (Min) | 1.8V |
| Input Voltage-Nom | 2V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Nominal Supply Current | 220μA |
| Output Configuration | Positive |
| Current - Output | 125mA |
| Voltage - Output (Min/Fixed) | 3.3V |
| Topology | Charge Pump |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1MHz |
| Synchronous Rectifier | No |
| Switcher Configuration | TRIPLER |
| Max Duty Cycle | 50 % |
| Max Junction Temperature (Tj) | 150°C |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3.05mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX1595EUA33+T Overview
There is an optimized performance in this voltage regulator because it utilizes the Tape & Reel (TR) package. There are 8 terminations in this harley voltage regulator. There is one type of analog IC that this voltage regulator is equipped with, and that is the SWITCHED CAPACITOR REGULATOR type. This harley voltage regulator is available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package for the purpose of space saving. There are 1 outputs configured on this voltage regulator 12v. There are output pins on this DC DC switching regulator that generate Fixed output. This voltage regulator 12v fits the Surface Mount mounting. As long as its operating temperature is -40°C~85°C TA, dc to dc voltage regulator should perform well. A DC-DC switching regulator such as this one switches at 1MHz. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 1.8V. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 3.3V. It features maximum design flexibility due to dc to dc voltage regulator's 125mA output current. As a result of its peak reflow temperature, this voltage regulator is virtually indestructible. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 2V. DC DC switching regulator is part of the Switching Regulator or Controllers subcategory and can be found in the Switching Regulator or Controllers category. DC/DC regulators of this type are part of the MAX1595 family of voltage regulator 12vs. Voltage can be produced at 3.33V volts by voltage regulator. In order to operate voltage regulator, 8 pins are required. In order to ensure reliable performance, a dc to dc voltage regulator's minimum supply voltage of 1.8V V is required. A maximum supply voltage of 5.5V can be used to operate the voltage regulator 12v.
MAX1595EUA33+T Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
MAX1595EUA33+T Applications
There are a lot of Maxim Integrated MAX1595EUA33+T Voltage Regulators applications.
- Remotely powered electric motors
- Pipe bending machines
- Domestic water pumps
- Precision electronic equipment
- Experimental setup
- Gear/thread machining machines
- CNC system
- Motor controller circuits
- Computer monitoring equipment of building
- Window air conditioners
