banner_page

MAX16000ATC+T

3.3V12 Terminals 12-Pin MAX16000 Voltage supervisor4 Channels Min 1V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX16000ATC+T
  • Package: 12-WQFN Exposed Pad
  • Datasheet: PDF
  • Stock: 868
  • Description: 3.3V12 Terminals 12-Pin MAX16000 Voltage supervisor4 Channels Min 1V Max 5.5V (Kg)

Details

Tags

Parameters
Supply Current-Max (Isup) 0.07mA
Undervoltage Threshold 1.62V
Overvoltage Threshold 3.135V
Height Seated (Max) 0.8mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 12-WQFN Exposed Pad
Number of Pins 12
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
Published 2012
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 12
ECCN Code EAR99
Type Multi-Voltage Supervisor
Terminal Finish Matte Tin (Sn)
Additional Feature MANUAL RESET INPUT
Subcategory Power Management Circuits
Max Power Dissipation 1.349W
Technology BICMOS
Terminal Position QUAD
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.8mm
Base Part Number MAX16000
Output Open Drain or Open Collector
Pin Count 12
Power Supplies 2.5/5V
Number of Channels 4
Max Supply Voltage 5.5V
Min Supply Voltage 1V
Operating Supply Current 50μA
Adjustable Threshold YES
Watchdog Timer No
Reset Active Low
Voltage - Threshold 1.8V 2.5V 3.3V Adj
Number of Voltages Monitored 4
Reset Timeout 140ms Minimum

MAX16000ATC+T Overview


There are 12 terminals connected to this power management, which makes it easy to mount. A Tape & Reel (TR) package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 4 channels that can be found. In this IC management you will find 12-WQFN Exposed Pad functions for you to refer to. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. During operation, the power ic is supplied with a voltage of 3.3V. When a supply voltage of 4 is applied to the power ic, it conducts. Surface Mount mounts IC management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. 12 pins are present in total in this power management. 12 pins are present on the power management system. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. For this power management, there is an 50μA volt supply current. In addition, IC management are other features such as [0], to mention only a few. For similar manage ics search of the manufacturer, you can always refer to MAX16000, the base PMIC number. There is a requirement for 2.5/5V power to power this power management.

MAX16000ATC+T Features


Multi-Voltage Supervisor type
Minimum supply voltage of 1V
50μA operating supply current

MAX16000ATC+T Applications


There are a lot of Maxim Integrated MAX16000ATC+T Voltage Supervisors applications.

  • Refrigeration
  • FPGA design
  • Power distribution systems of CCU
  • Military electronics
  • Medical-specific isolation transformer
  • Stable power system
  • WiFi router
  • Insulation fault location system
  • Network equipment
  • Multi-voltage system

Write a review

Note: HTML is not translated!
    Bad           Good