Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
12-WQFN Exposed Pad |
Number of Pins |
12 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tube |
Published |
2016 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
12 |
ECCN Code |
EAR99 |
Type |
Multi-Voltage Supervisor |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
MANUAL RESET INPUT |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
1.349W |
Technology |
BICMOS |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.8mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
MAX16000 |
Output |
Open Drain or Open Collector |
Pin Count |
12 |
Power Supplies |
2.5/5V |
Number of Channels |
4 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1V |
Operating Supply Current |
50μA |
Adjustable Threshold |
YES |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
1.8V 3.3V Adj Adj |
Number of Voltages Monitored |
4 |
Reset Timeout |
140ms Minimum |
Supply Current-Max (Isup) |
0.07mA |
Undervoltage Threshold |
1.62V |
Overvoltage Threshold |
3.135V |
Height Seated (Max) |
0.8mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX16000BTC+ Overview
As you can see, this power management is mounted through 12 terminals. In terms of packaging, power management follows the Tube model. In this PMIC, you can find 1 functions for your reference. There are 4 channels on this power managment ic that can be found in a series. There are 12-WQFN Exposed Pad functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. As specified in the package specification, the peak reflow temperature of the package is set at 260. IC management conducts at a voltage of 3.3V. A supply voltage of 4 is used to conduct the PMIC chip. The power management is mounted by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 12 pins are located on this power management. This power management has 12 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The recommended mounting type is Surface Mount. This range of temperature should be set for the supervisors: -40°C~125°C TA. Power management has an output of Open Drain or Open Collector during operation. The supply current of the power management is 50μA. Supervisors are also additional features, such as [0] for example, which are worth mentioning. You can always use MAX16000, the base supervisor number, to search for similar PMICs of the manufacturer. The power management must be powered by 2.5/5V volts to function properly.
MAX16000BTC+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
50μA operating supply current
MAX16000BTC+ Applications
There are a lot of Maxim Integrated MAX16000BTC+ Voltage Supervisors applications.
- Personal computers
- Dash board
- Power distribution systems of CCU
- Important electronics for automotive safety
- Battery cars
- Battery cars
- Detection of phase loss
- Utility meter
- Solar power charger
- Digitally controlled LDO regulators circuit