MAX16000DTC+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WQFN Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.349W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Base Part Number | MAX16000 |
| Output | Open Drain or Open Collector |
| Pin Count | 12 |
| Power Supplies | 2.5/5V |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 50μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.5V 3.3V Adj Adj |
| Number of Voltages Monitored | 4 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.07mA |
| Undervoltage Threshold | 2.25V |
| Overvoltage Threshold | 3.135V |
| Height Seated (Max) | 0.8mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX16000DTC+T Overview
This power management consists of 12 mounting terminals on which it can be mounted. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Please refer to this PMIC for 1 functions. Depending on the power managment ic you are looking at, you can find a total of 4 channels. In this PMIC, you can find 12-WQFN Exposed Pad functions for your reference. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. Manage ics operate at 3.3V supply voltages. During operation, the power ic is supplied with a voltage of 4. Surface Mount mounts power management on the wall. Power Management Circuits is a subcategory of this PMIC chip. Taking into account all of the pins, this power management has a total of 12. This power management system has 12 pins. It is recommended that Vsup should not be less than 1V for this IC power. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~125°C. The output voltage of this power managment ic during operation is Open Drain or Open Collector. For this power management, there is an 50μA volt supply current. Power management is also possible to add other features such as MANUAL RESET INPUT to name a few. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX16000, which is the base power ics number. A power supply of 2.5/5V watts is required for the operation of this power management.
MAX16000DTC+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
50μA operating supply current
MAX16000DTC+T Applications
There are a lot of Maxim Integrated MAX16000DTC+T Voltage Supervisors applications.
- Medical-specific isolation transformer
- Analog circuit
- Automotive permanent magnet synchronous motors
- Power distribution systems of infant care room
- Dash board
- Military electronics
- Stable power system
- Power distribution systems of operating room
- Radar
- Satellite navigation
