MAX16001ATE+
| Parameters | |
|---|---|
| Base Part Number | MAX16001 |
| Output | Open Drain or Open Collector |
| Pin Count | 16 |
| Power Supplies | 2.5/5V |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 50μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 1.8V 2.5V 3.3V Adj |
| Number of Voltages Monitored | 4 |
| Reset Timeout | Adjustable/Selectable |
| Supply Current-Max (Isup) | 0.07mA |
| Undervoltage Threshold | 1.62V |
| Overvoltage Threshold | 3.135V |
| Height Seated (Max) | 0.8mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.349W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
MAX16001ATE+ Overview
There are 16 terminals on this power management that allow it to be mounted. Packaged in the form of a Tube, power management is easy to use. Please find attached 1 functions for your reference in this IC power. This power managment ic consists of 4 channels, each of which can be used independently. In this PMIC, you can find 16-WQFN Exposed Pad functions for your reference. Several of the benefits of this PMIC are also shared by other Multi-Voltage Supervisor products. IC management is specified that the package peak reflow temperature should be 260. During operation, the power ic is supplied with a voltage of 3.3V. When 4 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. Power Management Circuits is a subcategory of this PMIC chip. Taking into account all of the pins, this power management has a total of 16. Pin count of the power management is 16. Supply voltage (Vsup) should be at least 1V for this power management. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. In this case, Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 50μA is the recommended value. Power management is also possible to add other features such as MANUAL RESET INPUT to name a few. You can always use MAX16001, the base supervisor number, to search for similar PMICs of the manufacturer. It is necessary to have 2.5/5V volts of power in order for this voltage supervisor to operate.
MAX16001ATE+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
50μA operating supply current
MAX16001ATE+ Applications
There are a lot of Maxim Integrated MAX16001ATE+ Voltage Supervisors applications.
- Computer applications
- Power distribution systems of CCU
- Power distribution systems of operating room
- Consumer electronics
- Household appliances
- Medical-specific isolation transformer
- Rechargeable batteries
- Medical-specific insulation monitor
- Power communication system
- Automotive permanent magnet synchronous motors
