MAX16001BTE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.349W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX16001 |
| Output | Open Drain or Open Collector |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 2.5/5V |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 50μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 1.8V 3.3V Adj Adj |
| Number of Voltages Monitored | 4 |
| Reset Timeout | Adjustable/Selectable |
| Supply Current-Max (Isup) | 0.07mA |
| Undervoltage Threshold | 1.62V |
| Overvoltage Threshold | 3.135V |
| Height Seated (Max) | 0.8mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX16001BTE+T Overview
There are 16 terminals connected to this power management, which makes it easy to mount. In terms of packaging, power management follows the Tape & Reel (TR) model. Please find attached 1 functions for your reference in this IC power. On this supervisor, there is a series of 4 channels that can be found. For your reference, this PMIC includes a list of 16-WQFN Exposed Pad functions. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of NOT SPECIFIED for the package during reflow. Manage ics operate at 3.3V supply voltages. During operation, the power ic is supplied with a voltage of 4. Surface Mount is the one that mounts power management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. The total number of pins on this power management is 16. There are 16 pins on the power managment ic. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount mounting is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. For this power management, there is an 50μA volt supply current. Power management is also possible to add other features such as MANUAL RESET INPUT to name a few. To find similar IC managements from the manufacturer, you can always search by MAX16001. A power supply of 2.5/5V watts is required for the operation of this power management.
MAX16001BTE+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
50μA operating supply current
MAX16001BTE+T Applications
There are a lot of Maxim Integrated MAX16001BTE+T Voltage Supervisors applications.
- Power communication system
- Battery-powered equipment
- Telecommunications equipment
- Detection of phase loss
- Solar power charger
- Medical-specific insulation monitor
- Leakage current detection
- Electronics installed in the vehicle
- Efficient information transmission
- Satellite navigation
