MAX16001DTE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.349W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX16001 |
| Output | Open Drain or Open Collector |
| Pin Count | 16 |
| Power Supplies | 2.5/5V |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 50μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.5V 3.3V Adj Adj |
| Number of Voltages Monitored | 4 |
| Reset Timeout | Adjustable/Selectable |
| Supply Current-Max (Isup) | 0.07mA |
| Undervoltage Threshold | 2.25V |
| Overvoltage Threshold | 3.135V |
| Height Seated (Max) | 0.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX16001DTE+ Overview
There are 16 terminals connected to this power management, which makes it easy to mount. A Tube package is used to package the power management. To assist you, this IC power includes 1 functions. Depending on the power managment ic you are looking at, you can find a total of 4 channels. There are 16-WQFN Exposed Pad functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. There is a specification for the peak reflow temperature of the package to be 260. The supervisor is always powered by a 3.3V volt supply. There is a voltage supply of 4 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by a Surface Mount-axis. There is a subcategory called Power Management Circuits for this power management. A total of 16 pins are located on this power management. There are 16 pins on the power managment ic. Supply voltage (Vsup) should be at least 1V for this power management. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Mounting type Surface Mount is recommended. You should set the supervisor's temperature during -40°C~125°C TA . During operation, this power management system outputs Open Drain or Open Collector. For this power management, there is an 50μA volt supply current. Additionally, IC management are a variety of features, for example [0], to name a few. For similar manage ics search of the manufacturer, you can always refer to MAX16001, the base PMIC number. A power supply of 2.5/5V watts is required for the operation of this power management.
MAX16001DTE+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
50μA operating supply current
MAX16001DTE+ Applications
There are a lot of Maxim Integrated MAX16001DTE+ Voltage Supervisors applications.
- Computer applications
- Power distribution systems of operating room
- Cloud computing
- Electronics installed in the vehicle
- Rechargeable batteries
- Telecommunications equipment
- Radar
- Linux and server computing
- Stable power system
- Functional modules
