MAX16003ATE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET INPUT |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.349W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX16003 |
| Output | Open Drain or Open Collector |
| Pin Count | 16 |
| Power Supplies | 2.5/5V |
| Number of Channels | 6 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 50μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 6 Selectable Threshold Combinations |
| Number of Voltages Monitored | 6 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.07mA |
| Undervoltage Threshold | 1.62V |
| Overvoltage Threshold | 3.135V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX16003ATE+ Overview
A total of 16 terminals are used to mount this power management. Power management is packaged in a Tube way. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 6 channels that can be found. Please find attached 16-WQFN Exposed Pad functions for your reference in this IC power. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. The package peak reflow temperature is specified to be 260. When a supply voltage of 3.3V is applied to the power ic, it conducts. There is a voltage supply of 6 for the PMIC chip, and the chip conducts at that voltage. Using Surface Mount, IC management is mounted. There is a subcategory called Power Management Circuits for this power management. The total number of pins on this power management is 16. There are 16 pins on the supervisor. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. There is a 50μA supply current present in the power management. In addition, IC management are other features such as [0], to mention only a few. It is always advisable to use MAX16003, the base supervisor number, when searching for similar PMICs from the manufacturer. To operate this power management, you will need at least 2.5/5V volts of power.
MAX16003ATE+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
50μA operating supply current
MAX16003ATE+ Applications
There are a lot of Maxim Integrated MAX16003ATE+ Voltage Supervisors applications.
- Leakage current detection
- Power distribution systems of infant care room
- Electronics installed in the vehicle
- Microcontroller system
- Urban rail transit weak current power monitoring
- Unattended substation automation
- Computer applications
- Leakage protection
- Military communications
- DC stabilized power supply module
