MAX16004ATP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET INPUT |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.355W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX16004 |
| Output | Open Drain or Open Collector |
| Pin Count | 20 |
| Power Supplies | 2.5/5V |
| Number of Channels | 6 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 50μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 6 Selectable Threshold Combinations |
| Number of Voltages Monitored | 6 |
| Reset Timeout | Adjustable/Selectable |
| Supply Current-Max (Isup) | 0.07mA |
| Undervoltage Threshold | 1.62V |
| Overvoltage Threshold | 3.135V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX16004ATP+ Overview
There are 20 terminals connected to this power management, which makes it easy to mount. Packaging is in the form of a Tube. As a reference, this IC management includes 1 functions for your convenience. On this supervisor, there is a series of 6 channels that can be found. The purpose of this IC power is to provide you with a reference of 20-WFQFN Exposed Pad functions. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. IC management is specified that the package peak reflow temperature should be 260. A supply voltage of 3.3V is used to conduct the PMIC chip. During operation, the power ic is supplied with a voltage of 6. The mount is provided by Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, the power management has 20 pins in it. There are 20 pins on the supervisor. Supply voltage (Vsup) should be at least 1V for this power management. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. There is a 50μA supply current present in the power management. There are other features such as MANUAL RESET INPUT to name a few. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX16004, which is the base power ics number. To operate this power management, you will need at least 2.5/5V volts of power.
MAX16004ATP+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
50μA operating supply current
MAX16004ATP+ Applications
There are a lot of Maxim Integrated MAX16004ATP+ Voltage Supervisors applications.
- Functional modules
- Leakage current detection
- DVR
- Detection of phase sequence
- Electronics installed in the vehicle
- Medical-specific isolation transformer
- Rechargeable batteries
- Microcontroller system
- Personal computers
- Power communication system
