MAX16004ATP+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET INPUT |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.355W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX16004 |
| Output | Open Drain or Open Collector |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Power Supplies | 2.5/5V |
| Number of Channels | 6 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 50μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 6 Selectable Threshold Combinations |
| Number of Voltages Monitored | 6 |
| Reset Timeout | Adjustable/Selectable |
| Supply Current-Max (Isup) | 0.07mA |
| Undervoltage Threshold | 1.62V |
| Overvoltage Threshold | 3.135V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX16004ATP+T Overview
A total of 20 terminals are used to mount this power management. Power management is packaged in a Tape & Reel (TR) way. To assist you, this IC power includes 1 functions. On this supervisor, there is a series of 6 channels that can be found. As a reference, this IC power includes 20-WFQFN Exposed Pad functions for your convenience. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. IC management is specified that the package peak reflow temperature should be 260. IC management conducts in a 3.3V-voltage supply. During operation, the power ic is supplied with a voltage of 6. Using Surface Mount, IC management is mounted. The power management system can be categorized as a Power Management Circuits chip. 20 pins are present in total in this power management. Power managment ic pin count is 20. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The temperature of the supervisors should be set to this range: -40°C~125°C TA. Power management has an output of Open Drain or Open Collector during operation. For this power management, there is an 50μA volt supply current. Power management is also possible to add other features such as MANUAL RESET INPUT to name a few. For similar manage ics search of the manufacturer, you can always refer to MAX16004, the base PMIC number. In order to operate this power management, it requires 2.5/5V volts of power.
MAX16004ATP+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
50μA operating supply current
MAX16004ATP+T Applications
There are a lot of Maxim Integrated MAX16004ATP+T Voltage Supervisors applications.
- Leakage protection
- Medical-specific insulation monitor
- Medical-specific isolation transformer
- Analog circuit
- Detection of phase imbalance
- Unattended substation automation
- Precision measurement
- Smartphones
- Utility meter
- Smart meter
